In Reply to: RE: Gonna try fiber optic... posted by Sprezza Tura on August 21, 2015 at 15:37:33:
I think you'll find the stock switch mode wall wart to be inferior for a fiber optic audio application. I recommend at least to replace the stock switching power supply with a basic regulated linear power supply wall-wart priced around 6 bucks via eBay. I did such for a digital audio optical splitter/repeater and found it definitely sounded better than the stock switch mode PSU. However, I found an inexpensive audiophile quality power supply unit sourced from eBay to sound substantially better than the previous wall-wart upgrade. A very worthwhile modest expense and effort.
Since your application requires a power supply unit for each device, the dual output DC-2 model would be an even more affordable option to consider, including the need of only one aftermarket audiophile power cord upgrade if you wish, since I find the single output DC-1 model to be very sensitive to power cord swapping. I settled for a DIY Acrolink 7N-P4020III power cord terminated with Oyaide P-079 AC plug and Oyaide C-079 IEC connector in my cable collection.
Single output DC-1 linear PSU:
http://www.ebay.com/sch/i.html?_odkw=linear+power+supply+DC-1&_sop=15&_osacat=293&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=linear+power+supply+DC-1&_sacat=293
Dual output DC-2 linear PSU:
http://www.ebay.com/sch/i.html?_odkw=linear+power+DC-2&_sop=15&_osacat=293&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xlinear+power+supply+DC-2.TRS0&_nkw=linear+power+supply+DC-2&_sacat=293
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Power supply upgrade for fiber optic audio application. - Duster 12:11:25 08/23/15 (9)
- RE: Power supply upgrade for fiber optic audio application. - Sprezza Tura 12:14:56 08/23/15 (8)
- RE: Power supply upgrade for fiber optic audio application. - Duster 14:12:26 08/23/15 (1)
- RE: Power supply upgrade for fiber optic audio application. - Sprezza Tura 19:54:31 08/23/15 (0)
- RE: Power supply upgrade for fiber optic audio application. - Dynobot 13:00:42 08/23/15 (5)
- RE: Power supply upgrade for fiber optic audio application. - Sprezza Tura 13:10:58 08/23/15 (4)
- RE: Power supply upgrade for fiber optic audio application. - Dynobot 13:31:27 08/23/15 (3)
- RE: Power supply upgrade for fiber optic audio application. - Duster 15:03:15 08/23/15 (2)
- RE: Power supply upgrade for fiber optic audio application. - Dynobot 17:10:28 08/23/15 (1)
- It's all good then (nt) - Duster 17:20:42 08/23/15 (0)