In Reply to: RE: Very good question.- and a non answer posted by Sprezza Tura on July 1, 2015 at 21:44:15:
They were at CES because they had a prototype dac which they wanted to see if there was any interest in it. The demo consisted of a digital 1000hz signal that they sent to a dac (not there dac) over a 30 meter Ethernet cable. At the output of the dac they filtered out the 1000hz signal leaving a bunch of squealing sounds and tones which were very audible. The gentleman from Prism said that was the sound of cable induced jitter.
He said there can be jitter in the original recording, cable induced jitter and jitter caused by the dac.
Alan
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Very good question.- and a non answer - ahendler 21:59:46 07/01/15 (5)
- RE: Very good question.- and a non answer - Tony Lauck 11:33:13 07/04/15 (1)
- RE: Very good question.- and a non answer - Sprezza Tura 11:50:13 07/04/15 (0)
- RE: Very good question.- and a non answer - Sprezza Tura 22:06:14 07/01/15 (2)
- RE: Very good question.- and a non answer - ahendler 09:02:48 07/02/15 (1)
- RE: Very good question.- and a non answer - Sprezza Tura 09:19:08 07/02/15 (0)