In Reply to: RE: If the load impedance is indeed around 965K, a 0.005uF cap... posted by Lew on March 18, 2016 at 19:08:40:
...a 0.01uF SoniCap Platinum. FP will be about 16Hz, which is plenty low enough to avoid phase errors in the audible band--of these MR drivers, that is--and high enough to block or greatly reduce DC or large noise pulses which might destroy those irreplaceable drivers.* I tend to do this a lot, but my system has never sounded better, so some good must come of it. ... :-)
Edits: 03/25/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- The more I (over)think* this, the more I'm tending toward... - jeffreybehr 21:08:47 03/18/16 (4)
- If you are dealing with fragile drivers - Ralph 10:26:47 03/21/16 (3)
- RE: If you are dealing with fragile drivers - jeffreybehr 15:16:12 03/21/16 (2)
- I agree- sounds like you are in good shape nt - Ralph 08:34:26 03/22/16 (1)
- I've subsequently decided, after a discussion that you and I had here... - jeffreybehr 23:42:04 03/25/16 (0)