Home OTL Asylum

OTL, Output Transformerless Amplifier User Group.

RE: Mundorf M-Lytic HC+ 4-Pole 250V 22,000uF storage caps

This first picture shows the output from a speaker I am working on. The yellow line is the Mundorf modded amp, with the green line from the original.

I use my MP-1 as the signal generator, and I tested at an elevated volume level. I also disconnected the active woofer.

The slight rise in output below 1200Hz, gave a more fleshed out sound to my speakers. Female voice had a bit more body.
There is also a slight rise above 4K Hz.

What's interesting to me is the distortion measurements.

If you go back and forth between the two pictures, you will see the Mundorf modded amp has slightly lower distortion starting at 200Hz. There are a few small spikes in the original amp (namely at 430Hz). This lower distortion was easy to enjoy from day one, and I might go so far as to say it's getting better.








Over the last two weeks I have listened to a fair bit of music. One of my favorite albums is Dead Can Dance, Into the Labrynth. I have to say, the better the album, the more noticeable the improvements.

Time to listen to more music.


This post is made possible by the generous support of people like you and our sponsors:
  Signature Sound   [ Signature Sound Lounge ]


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.