In Reply to: an I raise the 200uF values simply by installing a film cap across each 100uF pair? posted by Lew on March 13, 2014 at 19:06:37:
Lew, if you look carefully at my first picture, you will see there are actually 6 (100uF) caps per phase. 12 in total per amp.
On the right hand side of the HV caps there is a strip of wire which connects all 6 leads together (not noticeable in my picture).
On the left hand side you'll see that 2 (100uF) caps are wired together, and these 'sets' go off in different directions. So, 3 sets of 100uF per phase.
I would install 6 film caps in total per amp. One for each 'pair' of 100uF caps.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: an I raise the 200uF values simply by installing a film cap across each 100uF pair? - Cousin Billy 04:15:06 03/14/14 (1)
- RE: an I raise the 200uF values simply by installing a film cap across each 100uF pair? - Lew 11:00:58 03/14/14 (0)