In Reply to: Mike, that output stage supply operates at only 125VDC posted by Lew on March 12, 2014 at 16:49:20:
Mundorf makes the M-Lytics series. Would these be a good alternative. I am thinking the 27,000uF replacement. There might not be room to string multiple electrolytics under the hood.
22000uf / 80VDC, MLytic® HC, 75mmD x 70mmH, 5 ESR (mOhm), Each
$103.99
22000uf / 100VDC, MLytic® HC, 90mmD x 69mmH, 6 ESR (mOhm), Each
$110.94
47000uf / 80VDC, MLytic® HC, 91mmD x 70mmH, 5 ESR (mOhm), Each
$138.70
47000uf / 100VDC, MLytic® HC, 90mmD x 104mmH, 6 ESR (mOhm), Each
$166.47
PS. I build speakers, so know how to use a soldering station. I am a general contractor, in real life, and have worked around breaker panels. I respect electricity. Should I be concerned about the 80VDC or 100VDC ratings of the Mundorf's?.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Mike, that output stage supply operates at only 125VDC - Cousin Billy 04:18:54 03/13/14 (21)
- 4700uF Panasonic - Lew 11:39:36 03/13/14 (0)
- RE: Mike, that output stage supply operates at only 125VDC - Lew 07:12:31 03/13/14 (19)
- Correction- the supply voltage is a little higher. - Ralph 11:48:52 03/13/14 (18)
- SUCCESS. Thank you everyone - Cousin Billy 16:08:57 03/16/14 (5)
- SUCCESS. Then a step backwards - Cousin Billy 17:56:45 03/17/14 (4)
- RE: SUCCESS. Then a step backwards - Lew 10:21:43 03/18/14 (3)
- just a FWIW - Ralph 12:14:45 03/18/14 (2)
- I guess you are suggesting - Lew 13:13:07 03/18/14 (1)
- not exactly - Ralph 13:27:31 03/18/14 (0)
- RE: Correction- the supply voltage is a little higher. - tyu 12:01:57 03/13/14 (11)
- Some of the older amps had lower voltages - Ralph 14:15:41 03/13/14 (10)
- My education continues - Cousin Billy 17:23:42 03/13/14 (3)
- an I raise the 200uF values simply by installing a film cap across each 100uF pair? - Lew 19:06:37 03/13/14 (2)
- RE: an I raise the 200uF values simply by installing a film cap across each 100uF pair? - Cousin Billy 04:15:06 03/14/14 (1)
- RE: an I raise the 200uF values simply by installing a film cap across each 100uF pair? - Lew 11:00:58 03/14/14 (0)
- I guess I measure about 132V, most days,... - Lew 16:32:52 03/13/14 (4)
- In the case of Billy's amps - Ralph 08:30:19 03/14/14 (3)
- Last Question? - Cousin Billy 10:02:10 03/20/14 (2)
- the downside - Ralph 10:44:01 03/20/14 (1)
- RE: the downside - Cousin Billy 13:08:36 03/20/14 (0)
- RE: Some of the older amps had lower voltages - tyu 15:58:52 03/13/14 (0)