In Reply to: RE: NYAL OTL3 posted by rhinohifi714 on March 6, 2014 at 17:49:44:
Hi,
Yes I have the biasing instructions that you sent. My original problem was V1, it started to glow upon switch on. I tried all the other tubes (V2, V3,V6-V8) in V1 position and all glowed in V1 position. V1 glows in V2 and V3 position. V6-V8 also glow in V1-V3 position.
I therefore had to get a replacement that would not glow before biasing the amp. Now that I have a replacement for V1, V5 is glowing upon switch on. V4 also glows in V5 position while V5 does not glow in V4 position.
Will try to switch on the amp with the screen controls at the lowest setting and see what happens.
Thanks for comments. Any further comments would be appreciated.
Nara
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: NYAL OTL3 - v_n_naidu@hotmail.com 19:37:23 03/06/14 (21)
- RE: NYAL OTL3 - unlisted 06:03:06 03/21/14 (20)
- RE: NYAL OTL3 - unlisted 11:39:25 03/21/14 (19)
- RE: NYAL OTL3 - rhinohifi714 17:35:04 03/21/14 (18)
- RE: NYAL OTL3 - unlisted 18:01:52 03/21/14 (17)
- RE: NYAL OTL3 - airheadair 11:51:57 03/23/14 (16)
- RE: NYAL OTL3 - unlisted 13:16:15 03/23/14 (15)
- RE: NYAL OTL3 - unlisted 14:35:23 03/24/14 (14)
- RE: NYAL OTL3 - rhinohifi714 18:37:03 03/24/14 (11)
- RE: NYAL OTL3 - unlisted 19:26:19 03/24/14 (10)
- RE: NYAL OTL3 - rhinohifi714 05:34:54 03/25/14 (9)
- RE: NYAL OTL3 - unlisted 16:00:21 03/25/14 (0)
- RE: NYAL OTL3 - unlisted 06:41:52 03/25/14 (7)
- RE: NYAL OTL3 - unlisted 09:05:27 03/25/14 (6)
- RE: NYAL OTL3 - rhinohifi714 16:00:41 03/25/14 (5)
- RE: NYAL OTL3 - unlisted 17:05:37 03/25/14 (4)
- RE: NYAL OTL3 - rhinohifi714 17:42:49 03/25/14 (3)
- RE: NYAL OTL3 - airheadair 23:22:30 03/25/14 (2)
- RE: NYAL OTL3 [SOLVED] - unlisted 12:46:16 03/26/14 (1)
- RE: NYAL OTL3 [SOLVED] - airheadair 14:23:39 03/27/14 (0)
- RE: NYAL OTL3 - rhinohifi714 18:20:42 03/24/14 (1)
- RE: NYAL OTL3 - unlisted 18:50:42 03/24/14 (0)