In Reply to: RE: NYAL OTL 3 posted by Banat on June 5, 2012 at 09:26:22:
Thanks for your comments Banat,
Checked all the resistors when I received the amps and they were all within specs. The problem is not with a particular tube position in the upper bank.
Only 2 of the original tubes in the upper bank do not glow in any position in the upper bank. One tube in the upper bank glows in all the 3 positions in the upper bank. Also all the 3 tubes from the lower bank glow in all the 3 positions in the upper bank. All the six tubes do not glow in the lower bank.
Also all the 10 tubes that were purchased subsequently glow in all the 3 positions in the upper bank. Frankly I'm puzzled. If the problem is with a particular tube position in the upper bank,then it would be easier to find a solution.
This is the reason why I am considering using the amp with 2 tubes in each bank if this does not require any change to the circuit.
Rgds,
Nara
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: NYAL OTL 3 - v_n_naidu@hotmail.com 01:17:04 06/06/12 (5)
- RE: NYAL OTL 3 - 714rhino 02:48:12 06/08/12 (4)
- RE: NYAL OTL 3 - v_n_naidu@hotmail.com 01:18:00 06/11/12 (3)
- RE: NYAL OTL 3 - 714rhino 21:27:37 06/19/12 (2)
- RE: NYAL OTL 3 - v_n_naidu@hotmail.com 06:40:55 06/20/12 (1)
- RE: NYAL OTL 3 - 714rhino 19:25:17 06/20/12 (0)