Home OTL Asylum

OTL, Output Transformerless Amplifier User Group.

RE: SoundLab transformer MOD

The 1st drawing is the Acoustat. The 2nd is for Sound Lab.

The mods seem to follow two pathways. One is to remove the resistor as seen in the second drawing, along with the inductor, and change the cap value to 15-22uf. A lot of people remove the Brilliance control entirely.

The second path is to replace the HF toroid entirely with a new one that comes from Australia. So far from what I have heard with this mod there is no crossover at all for the HF toroid, but I suspect a cap of the right value in series with it will help out.

Either way the speaker is a lot easier to drive! Not only for OTLs, but people with transistor amps have reported the same thing, and in all cases it sounds better. Its not hard to see why- that resistor as shown in this example is a 40-watt device (some versions have 80-watt power ratings). It has to have that kind of power handling to survive- and the power to heat it comes from the amp. Take it out and the amp does not have to work as hard; sound quality is improved at all frequencies as a result.

The only issue with the 1st pathway is that the HF toroid should not have low frequencies applied to it else it could distort due to saturation. That is easily solved by simply decreasing the cap value, which has the added benefit of greater transparency. In some cases the cap is easily decreased as there are several in parallel and one can be simply cut out, in other cases the cap has to be replaced outright.


This post is made possible by the generous support of people like you and our sponsors:
  McShane Design  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.