In Reply to: That should be MA-1.Mk II (nt) posted by Atmaluvr on March 30, 2005 at 13:59:21:
With no speaker load 10mV is fine, since this is simply caused by noise in the circuit rather then actual drift.The buzz you refer to is coming from something else. The first thing to do is to check your driver tubes (*not* the output tubes).
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: That should be MA-1.Mk II (nt) - Ralph 14:14:26 03/30/05 (0)