lets say I use the cheap and limited but loud Selenium D250 Trio on a 511 horn - maybe a Peavey RX14 or ASD1001 for a tweeter rolling in around 3KHz. My single 12" midbass horn seems close to 105dB 2.83v 1M 2pi. What tweeter horn is appropriate ? CD waveguide ? - more traditional horn ? - if latter, what might work that's cheap and available ? this is going to be a mono rig
Karlson Evangelist
This post is made possible by the generous support of people like you and our sponsors:
Topic - If using a 511 for mid ~400-3KHz - what horn/WG type for the tweeter ? - freddyi 14:42:37 10/27/16 (15)
- why a 511, freddyi? - mhardy6647 11:22:34 10/28/16 (7)
- What Horn & Driver? - thetubeguy1954 21:40:21 11/02/16 (2)
- Community BRH90A and JBL 2441 - mhardy6647 09:14:44 11/03/16 (1)
- RE: Thanks (nt) - thetubeguy1954 13:07:54 11/09/16 (0)
- RE: why a 511, freddyi? - freddyi 12:42:53 10/28/16 (3)
- they sure don't have a good reputation below 800 Hz or so... - mhardy6647 14:25:26 10/28/16 (2)
- RE: they sure don't have a good reputation below 800 Hz or so... - freddyi 15:27:45 10/28/16 (1)
- RE: they sure don't have a good reputation below 800 Hz or so... - Hornlover 08:37:44 10/31/16 (0)
- RE: If using a 511 for mid ~400-3KHz - what horn/WG type for the tweeter ? - Hornlover 08:34:57 10/28/16 (2)
- RE: If using a 511 for mid ~400-3KHz - what horn/WG type for the tweeter ? - freddyi 15:57:31 10/28/16 (0)
- "high performance plastic" :-) - mhardy6647 15:11:51 10/28/16 (0)
- RE: If using a 511 for mid ~400-3KHz - what horn/WG type for the tweeter ? - Alpha Al 06:24:17 10/28/16 (3)
- RE: If using a 511 for mid ~400-3KHz - what horn/WG type for the tweeter ? - freddyi 12:54:27 10/28/16 (0)
- RE: If using a 511 for mid ~400-3KHz - what horn/WG type for the tweeter ? - Hornlover 08:32:43 10/28/16 (1)
- RE: If using a 511 for mid ~400-3KHz - what horn/WG type for the tweeter ? - Alpha Al 09:31:37 10/28/16 (0)