In Reply to: RE: Dipole Subwoofers posted by Crazy Dave on July 12, 2016 at 09:19:50:
Hi Dave,
Open baffles in general are very inefficient due to the significant rolloff caused by the baffle. Adding the H frame or U frame does help increase the low end efficiency but can only do so much.
A single Dipole18 is about 93dB 1W. With the dual 8ohm coils in parallel for 4ohm, 2.83V input gives a max efficiency of about 96.5dB way up at 400hz. Modelling a 24" x 24" flat baffle shows a drop of of about 16dB from there to 30hz giving 80.5dB 2.83V at that point. The U baffle or H frame should get back somewhere between 6-10dB efficiency at 30hz which is quite good. It also increases the max output by the same amount. The OB is capable of about 98dB at 30hz, again with the U or H frame giving 6-10dB more maximum output. This requires only 20V input to do so, about 100W. Proper placement in the room will get back several dB more output. The plan is to measure the OB, U, and H all outside. Then bring into our well treated 13' x 21' room with 9ft ceilings and get some measurements at the listening position as well.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Dipole Subwoofers - stryke23x 23:40:51 07/12/16 (1)
- RE: Dipole Subwoofers - Crazy Dave 08:00:32 07/13/16 (0)