In Reply to: RE: What the world needs is a good 10-12" LF driver for horns !! posted by EduardG on February 4, 2016 at 18:51:04:
Maybe for midrange, but not so much for maximum bass output.
In general, for a bass horn we want the mass corner to be no higher than the crossover point we want to use. The lower the mass corner, the higher the excursion, the higher the maximum output.
The 2226 has the same sensitivity below 200hz as the more efficient, higher mass corner D130. With it's much higher x-max it will have at least 6dB more output below 200hz.
A pair of high excursion 15's in a single corner horn, 146+dB without running out of x-max (60mm P-P).
Stiff laminated hex cone.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Mass Corner - djk 22:43:51 02/04/16 (8)
- RE: Mass Corner - EduardG 23:06:00 02/04/16 (7)
- RE: Mass Corner - djk 22:35:39 02/05/16 (0)
- RE: Mass Corner - Bill Fitzmaurice 04:50:04 02/05/16 (5)
- RE: Mass Corner - EduardG 08:58:50 02/05/16 (4)
- RE: Mass Corner - Bill Fitzmaurice 11:53:20 02/05/16 (2)
- RE: Mass Corner - EduardG 17:47:32 02/05/16 (1)
- RE: Mass Corner - Bill Fitzmaurice 19:09:01 02/05/16 (0)
- RE: Mass Corner - tomservo 09:33:08 02/05/16 (0)