In Reply to: RE: To Bi or not to Bi, that is the question.. posted by pix on July 3, 2015 at 12:37:05:
Yes, you need at least a capacitor on the tweeter to cut off bass frequencies. A resistor will pad the tweeter down and then a coil for the woofer. Getting the right values is easy once you pick a crossover point.
Adding a SS amp and DSP could be worse than just using one 300B amp and at 101db, it should be plenty loud enough.
-Rod
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: To Bi or not to Bi, that is the question.. - Rod M 19:25:09 07/03/15 (6)
- RE: To Bi or not to Bi, that is the question.. - pix 23:05:52 07/03/15 (5)
- RE: To Bi or not to Bi, that is the question.. - Rod M 06:50:41 07/04/15 (1)
- RE: To Bi or not to Bi, that is the question.. - tomservo 14:30:37 07/04/15 (0)
- Of course - drlowmu 03:30:25 07/04/15 (2)
- Acoustical measurements or datasheet? - pix 10:47:42 07/04/15 (1)
- RE: Acoustical measurements or datasheet? - drlowmu 07:12:49 07/09/15 (0)