Got re-magnetized 808-8A back from GPA.Bill told me these drivers don't have much output past 10KHz and start dropping off around 8KHz.
He suggested using the 800Hz crossover point with 811B horns.
I set up my XM9 for 800Hz and added a Foster horn tweeter crossing over first order at 13KHz.
This was OK except for a huge 9.5dB peak at 2KHz that was about 1 1/2 octaves wide.
I used a series cap and coil across the +/- of the 808-8A and it took out the 2KHz peak almost entirely.
-3dB point measured in room 13250Hz at my listening position.
The 808-8A/811B/Foster combo sounds very nice once dialed in.
Also added a powered sub from 80Hz to -3dB point of 38Hz.
I got Tuba 18 plans, not started on those yet.
Might do a mock up with cardboard since they seem a bit more complex than a simple ported box.
Edit: added some small wooden baffles to mount Foster horns to 811B.
Still debating need for active EQ and upgrade to 55-1220.
Edits: 04/06/15
This post is made possible by the generous support of people like you and our sponsors:
Topic - 808-8A : midrange driver ... - deathtube 667 07:01:09 04/04/15 (4)
- RE: 808-8A : midrange driver ... - Bikeryder 19:09:28 04/10/15 (3)
- RE: 808-8A : midrange driver ... - deathtube 667 20:12:38 04/10/15 (2)
- RE: 808-8A : midrange driver ... - Bikeryder 12:23:33 04/14/15 (1)
- RE: 808-8A : midrange driver ... - deathtube 667 20:18:46 04/14/15 (0)