In Reply to: RE: Tilt or raise horn system posted by Brian Levy on March 5, 2015 at 17:39:50:
The drivers on the H3 all mount from the front (outside the cabinet) the rear panel is fixed. You are seeing a 1/8" layer of F-11 Acoustical Felt around each of the horn mouths and over all of the woofer. Around the horns the F-11 is catching diffraction while over the woofer it is acting as an acoustical filter and as an acoustic load. I have also included a link so you can see the extensive solid white oak brace work inside the cabinets. The cabinets are internally damped with high density fiberglass ((about 90% totally stuffed) which is positioned such that only cut edges face the woofer this makes it much more absorbent, how the fiberglass is oriented when installed makes or breaks its use in this situation. There are also extensive modifications to the drivers and horns. Hope this is of interest. Best regards MOray James.
http://www.audiokarma.org/forums/showthread.php?t=438234
moray james
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Tilt or raise horn system - moray james 19:16:53 03/05/15 (0)