In Reply to: RE: Ping Kloss posted by Kloss on November 17, 2014 at 05:12:14:
Kloss,Thanks for the post and pic. You are free to post that pic of the neck and driver of the 13a, so John can see your craftsmanship.
"I would design so mouth benefits from floor reinforcement. So probably flip it use a strut or leg. "
EduardG- "Absolutely agree with you. And then about 2-3 inches off the floor. We found that putting the mouth flat onto the floor creates some strange coloration - nothing dramatic, but why not do it right if you can. "
Look at how high those ceilings are. I bet John did all of that ceiling work. I'm trying to picture them on their sides. Ed might add, on their sides and lifted up 2-3 inches.
Okay, dig this. On their side lifted up two inches. They are eight foot wide. You could put midhorns and tweets at the edges, or however you like to get your stereo image, and presto, one half of your living room gone. No, I'm just joking about the last part. I say BINGO!
Jamie
Big speakers and little amps blew my mind!
Edits: 11/17/14
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Ping Kloss - Mr_Steady 16:39:49 11/17/14 (14)
- RE: Ping Kloss - EduardG 21:31:20 11/17/14 (12)
- RE: Ping Kloss - Mr_Steady 17:56:54 11/18/14 (11)
- RE: Ping Kloss - EduardG 22:00:23 11/19/14 (0)
- My website: - the carpenter 17:41:39 11/19/14 (9)
- RE: My website: - Mr_Steady 20:31:30 11/19/14 (8)
- RE: My website: - the carpenter 22:57:16 11/19/14 (7)
- 60hz Hyperbolic Horn - Mr_Steady 18:19:15 11/25/14 (5)
- RE: 60hz Hyperbolic Horn - the carpenter 19:51:17 11/25/14 (4)
- RE: 60hz Hyperbolic Horn - the carpenter 20:35:19 11/26/14 (2)
- RE: 60hz Hyperbolic Horn - Mr_Steady 04:46:31 11/28/14 (1)
- RE: 60hz Hyperbolic Horn - lokie 10:05:31 11/28/14 (0)
- RE: 60hz Hyperbolic Horn - Mr_Steady 17:36:12 11/26/14 (0)
- RE: My website: - Mr_Steady 05:55:16 11/23/14 (0)
- RE: Ping Kloss - the carpenter 17:15:12 11/17/14 (0)