In Reply to: RE: PPSL hit box posted by moray james on July 27, 2014 at 15:20:49:
"I am sure that there is some form of damping which could be included into the cavity and on the driver basket which would go a long way to help it's just a matter of experimenting. I am sure some significant improvement could be found. "
I have done extensive testing with a wide variety of materials in varying thickness: acoustical felt, cotton, fiberglass, polyfill, lamb's wool.
None of them provide a "significant improvement", all of them are capable of reducing a peak around 170 Hz, but also reduce the output level below that by a similar amount, net result is just less output, with a similar peak.
And a day's measurement work, and a lot of cleanup after...
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Dampening materials - weltersys 13:29:12 07/28/14 (2)
- RE: Dampening materials - moray james 14:00:24 07/28/14 (1)
- RE: Dampening materials - Scott L 14:06:30 07/28/14 (0)