In Reply to: RE: Getting EV1823's and ST350's in phase..Ping Paul E. posted by Paul Eizik on June 5, 2014 at 20:34:04:
Thanks Paul. Yes there were some differences at intervals between the 3.9" points, but not the deepest nulls. I was focused on finding the deepest, so may have blown by the others.
I quickly realized the issues with the 3.5KHz sine wave. I had to reduce the base level to about 70dB to not excite the room resonances.
I do have the Stereophile Test CD 2, but the warble tones are centered at 3.15KHz and 4KHz. The XO point is 3.5KHz. So I didn't use, because I thought they weren't close enough. If either will work, that would be great!
I found a tone generator online:
http://www.wavtones.com/functiongenerator.php
Pretty cheap to buy a full function license. Could use it to generate a 3.5KHz warble tone and download.
Please let me know your thoughts on which may work the best.
Cheers,
Geary
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Getting EV1823's and ST350's in phase..Ping Paul E. - Geary Lyons 22:40:43 06/05/14 (1)
- RE: Getting EV1823's and ST350's in phase..Ping Paul E. - Paul Eizik 08:09:29 06/06/14 (0)