I just received my Dayton D250P drivers and when I went to check to make sure they would fit, I noticed that the mounting bolts are too short.
The mounting portion on the QSC horn is about 3/4" thick and the Mounting bolt that came with the Dayton D250P is about 15/16" long. Once you screw the bolt into the CD then it doesn't even come out the back end of the mounting part of the horn. So a mounting bolt of 1 1/8" to 1 1/4" is required to mate these two. Other than that, these two should work fine together.
This shouldn't be a big issues just thought I would pass this info along for those that are thinking of this combo of CD and horn.
Hope this helps.
This post is made possible by the generous support of people like you and our sponsors:
Topic - Dayton D250P and QSC horn issue/s - Cougar 12:09:00 03/02/14 (4)
- RE: Dayton D250P and QSC horn issue/s - hennfarm 09:13:48 03/09/14 (1)
- I still need to build the Xovers.... - Cougar 14:40:50 03/09/14 (0)
- RE: Dayton D250P and QSC horn issue/s - djk 19:01:46 03/03/14 (1)
- yes it does. - Cougar 18:12:14 03/04/14 (0)