In Reply to: A more typical tall, high driver MLTL posted by scooter on June 30, 2012 at 21:05:19:
Hi Scooter,Thanks for taking the time to share. I agree, a (decent) custom design does take into account the factors you mention, plus the amplifier output impedance. I commissioned such a design and it was by far the least expensive part of the project... maybe 5% of the total cost, probably less. I would recommend people do the same.
That said, some of the mentioned factors do not change with a change of room and a design can have enough flexibility and scope for tuning built in so that it can work well in a variety of rooms, providing the positioning is similar and the room size does not change to a large degree. If this were not the case, the design you suggest be made available would be of little use.
Cheers.
"In the beginner's mind there are many possibilities, in the expert's mind there are few." Shunryo Suzuki
Edits: 07/01/12
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: A more typical tall, high driver MLTL - RC Daniel 01:50:33 07/01/12 (1)
- RC ... what T/S parameters for GPA 604 III are you using? - scooter 13:02:18 07/16/12 (0)