In Reply to: RE: GPA 604-8H-III Build - Sneak Peak. posted by Sidewinder on June 14, 2012 at 18:18:36:
Hi David,I would if I could, but this is a bespoke design by Scott Lindgren & Co, who own the IP and drawings. Scott might release the drawings for a reasonable cost after I do some initial tuning and testing and provide him some feedback. You can contact Scott via his Woden Design site - he refers to the design as the Bison. He seems to be a straight shooter and a pleasure to work with.
The design is a ~290L MLTL, modelled using MJK MathCAD sheets (and Scott's experience!), specifically for use in a small to medium sized room, wall-loaded, and driven with an impedance in the general vicinity of 2.5 Ohms. As do most MLTLs, they have a small amount of tuning flexibility to allow room-specific optimisation. As I understand it though, the dimensions, bracing, materials and port-sizing are rather critical.
Cheers.
"In the beginner's mind there are many possibilities, in the expert's mind there are few." Shunryo Suzuki
Edits: 06/14/12
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: GPA 604-8H-III Build - Sneak Peak. - RC Daniel 19:55:33 06/14/12 (0)