High Efficiency Speaker Asylum

Need speakers that can rock with just one watt? You found da place.

Specialty Groups: SET Asylum

Onken Bass Cabinets for 15" Drivers - Bill Davison

Front midbass horn throat - schiller 03:37:35 08/09/08 (15)
- Trade-Offs - djk 14:20:54 08/10/08 (1)
  - RE: Trade-Offs - freddyi 19:39:24 08/11/08 (0)
- RE: Front midbass horn throat - WithTarragon 08:25:40 08/09/08 (12)
  - RE: Front midbass horn throat - Bill Fitzmaurice 07:59:27 08/10/08 (4)
    - Not exactly... - WithTarragon 09:12:15 08/10/08 (3)
      - RE: Not exactly... - Bill Fitzmaurice 09:20:54 08/10/08 (2)
        
        What is a better alternative - WithTarragon 12:36:02 08/10/08 (1)
        
        McBean's Horn Resp - Bill Fitzmaurice 08:53:29 08/11/08 (0)
  - RE: Front midbass horn throat - schiller 09:31:37 08/09/08 (6)
    - The throat would be the total open area. You had not previously mentioned a phase plug... - eso 10:17:22 08/09/08 (5)
      - RE: The throat would be the total open area. You had not previously mentioned a phase plug... - schiller 04:06:35 08/10/08 (4)
        
        Going that high with a driver designed as a direct radiator... - eso 07:25:11 08/10/08 (3)
        
        RE: Going that high with a driver designed as a direct radiator... - schiller 14:18:49 08/14/08 (0)
        
        Disagree - John Sheerin 10:07:28 08/10/08 (1)
        
        Agree - Bill Fitzmaurice 09:01:59 08/11/08 (0)
Plans/sketches of an Altec 612A utility Cabinet? - baja 01:34:04 08/09/08 (1)
- RE: Plans/sketches of an Altec 612A utility Cabinet? - baja 11:16:50 08/15/08 (0)
Clueless on hi eff speaker suggestions - Plinko 08:40:31 08/08/08 (7)
- RE: Clueless on hi eff speaker suggestions - Morgan66 23:27:58 08/08/08 (3)
  - yeah, this looks like a very inexpensive way to dive in - Plinko 08:24:00 08/09/08 (2)
    - RE: yeah, this looks like a very inexpensive way to dive in - Morgan66 23:19:55 08/09/08 (0)
    - RE: yeah, this looks like a very inexpensive way to dive in - jnorv 11:22:14 08/09/08 (0)
- Check Out CarderSound - thetubeguy1954 10:41:28 08/08/08 (0)
- Ok, to get it started, perhaps 604s in JE Labs build or PHP will work - Plinko 08:51:10 08/08/08 (1)
  - RE: Ok, to get it started, perhaps 604s in JE Labs build or PHP will work - schiller 04:22:11 08/10/08 (0)
Smaller heil protection lamp - sanman 08:40:39 08/07/08 (7)
- Fine - djk 12:49:01 08/07/08 (0)
- RE: Smaller heil protection lamp - WithTarragon 10:10:11 08/07/08 (0)
- RE: Smaller heil protection lamp - smcdonie@uwsp.edu 09:27:52 08/07/08 (4)
  - Are you sure? - djk 12:52:10 08/07/08 (3)
    - RE: Are you sure? - smcdonie@uwsp.edu 06:45:23 08/11/08 (0)
    - So I can put it on either lead going to the tweeter? - sanman 14:02:34 08/07/08 (1)
      - RE: So I can put it on either lead going to the tweeter? - djk 14:15:55 08/07/08 (0)
GPA 604 or 212 ? - Super G 19:25:01 08/06/08 (0)
medallion cabinets for free - sakurastms@aol.com 04:03:41 08/06/08 (8)
- wow - mhardy6647 17:14:11 08/06/08 (2)
  - RE: wow - Topper 13:01:10 08/08/08 (1)
    - heck, I am just north of Worcester, MA - mhardy6647 13:15:55 08/08/08 (0)
- Thanks. It's gone. - sakurastms@aol.com 14:48:11 08/06/08 (3)
  - RE: Thanks. It's gone. - gfederys 12:46:33 08/07/08 (1)
    - RE: Thanks. It's gone. - Doc B. 16:12:27 08/07/08 (0)
  - RE: Thanks. It's gone. - Crazy Dave 11:02:02 08/07/08 (0)
- RE: medallion cabinets for free - Les Hudson 11:20:39 08/06/08 (0)
Is it a good idea to use 4 fullrange divers for higher sensitivity - iamthanik@hotmail.com 00:55:58 08/06/08 (13)
- RE: Is it a good idea to use 4 fullrange divers for higher sensitivity - mor2bz 08:33:00 08/06/08 (1)
  - RE: Is it a good idea to use 4 fullrange divers for higher sensitivity - c3conv2 07:39:21 08/07/08 (0)
- RE: Is it a good idea to use 4 fullrange divers for higher sensitivity - Bill Fitzmaurice 07:09:49 08/06/08 (9)
  - Horizontal response - badman 10:20:55 08/07/08 (1)
    - RE: Horizontal response - Bill Fitzmaurice 18:53:53 08/07/08 (0)
  - RE: Is it a good idea to use 4 fullrange divers for higher sensitivity - c3conv2 07:33:57 08/07/08 (4)
    - RE: Is it a good idea to use 4 fullrange divers for higher sensitivity - Bill Fitzmaurice 19:02:50 08/07/08 (3)
      - RE: Is it a good idea to use 4 fullrange divers for higher sensitivity - c3conv 19:25:43 08/07/08 (2)
        
        RE: Is it a good idea to use 4 fullrange divers for higher sensitivity - Bill Fitzmaurice 06:39:41 08/08/08 (1)
        
        THANKS! na - c3conv2 05:53:50 08/09/08 (0)
  - RE: Is it a good idea to use 4 fullrange divers for higher sensitivity - pappy 1st 09:25:56 08/06/08 (1)
    - RE: Is it a good idea to use 4 fullrange divers for higher sensitivity - Bill Fitzmaurice 19:47:50 08/06/08 (0)
- RE: Is it a good idea to use 4 fullrange divers for higher sensitivity - hollowboy 04:46:35 08/06/08 (0)
jensens? - c3conv 19:17:18 08/05/08 (10)
- RE: jensens?- This link should help. - Crazy Dave 12:02:50 08/06/08 (0)
- RE: jensens? - Tom Brennan 21:31:44 08/05/08 (8)
  - They Also - djk 10:59:04 08/06/08 (7)
    - RE: They Also - Tom Brennan 11:20:46 08/06/08 (6)
      - RE: They Also - Hornlover 07:31:25 08/07/08 (0)
      - RE: They Also - c3conv 06:15:54 08/07/08 (4)
        
        How - djk 12:54:34 08/07/08 (3)
        
        RE: How - c3conv2 20:13:32 08/07/08 (0)
        
        RE: How - c3conv2 20:11:40 08/07/08 (0)
        
        RE: How - c3conv2 19:55:01 08/07/08 (0)
Formula? for - can I use these drivers horisontal? - Timbo in Oz 03:43:14 08/05/08 (0)
Would an Altec 604 work in a Jesen Imperial Horn cabinet? - ckowal 11:45:34 08/04/08 (4)
- RE: Would an Altec 604 work in a Jesen Imperial Horn cabinet? - djn 18:03:23 08/05/08 (2)
  - RE: Would an Altec 604 work in a Jesen Imperial Horn cabinet? - ckowal 07:27:11 08/06/08 (1)
    - RE: Would an Altec 604 work in a Jesen Imperial Horn cabinet? - djn 14:43:36 08/06/08 (0)
- RE: Would an Altec 604 work in a Jesen Imperial Horn cabinet? - munna 21:35:47 08/04/08 (0)
Question--Fostex 165K center dome - d.bennett7@comcast.net 17:36:56 08/03/08 (12)
- RE: Question--Fostex 165K center dome - Tom Brennan 11:56:42 08/07/08 (2)
  - RE: Question--Fostex 165K center dome - Godzilla. 09:06:24 08/08/08 (1)
    - RE: Question--Fostex 165K center dome - Tom Brennan 11:07:49 08/08/08 (0)
- RE: Question--Fostex 165K center dome - Paul Joppa 21:22:19 08/03/08 (5)
  - interesting - badman 11:20:41 08/04/08 (4)
    - RE: interesting - Paul Joppa 20:45:23 08/05/08 (3)
      - Controlled breakup - badman 08:00:38 08/06/08 (2)
        
        RE: Controlled breakup - Paul Joppa 13:18:07 08/06/08 (1)
        
        Interesting - badman 13:27:23 08/06/08 (0)
- not a big deal - troporobo 18:05:11 08/03/08 (2)
  - RE: not a big deal - d.bennett7@comcast.net 10:00:36 08/04/08 (0)
  - RE: not a big deal - Godzilla. 20:46:09 08/03/08 (0)
Altec 872a? - Bob Mc 17:22:20 08/03/08 (0)
There is a sale consisting of 4 Altec 414a woofers and - audiogatorjim 07:58:19 08/03/08 (3)
- RE: There is a sale consisting of 4 Altec 414a woofers and - Tom Brennan 08:07:28 08/03/08 (2)
  - Thanks Tom! Were these used in the VOT models? - audiogatorjim 08:11:23 08/03/08 (1)
    - RE: Thanks Tom! Were these used in the VOT models? - Tom Brennan 08:31:41 08/03/08 (0)
I need someone to advise on some Altec speakers - audiogatorjim 05:25:01 08/03/08 (1)
- RE: I need someone to advise on some Altec speakers - SidecarJay 13:39:06 08/09/08 (0)
Danley Sound Labs SH 50 speakers - Mike Spence 23:25:00 08/02/08 (41)
- Danley Sound Labs SH 50 speakers - followup - Mike Spence 19:45:19 08/04/08 (10)
  - RE: Danley Sound Labs SH 50 speakers - followup - tomservo 14:57:23 08/05/08 (9)
    - RE: Danley Sound Labs SH 50 speakers - followup - Crazy Dave 12:09:51 08/06/08 (6)
      - RE: Danley Sound Labs SH 50 speakers - followup - tomservo 11:17:01 08/09/08 (4)
        
        RE: Danley Sound Labs SH 50 speakers - followup - endust4237 20:34:06 08/09/08 (3)
        
        RE: Danley Sound Labs SH 50 speakers - followup - Crazy Dave 09:37:07 08/11/08 (2)
        
        RE: Danley Sound Labs SH 50 speakers - followup - endust4237 15:04:00 08/11/08 (1)
        
        Thanks! (nt) - Crazy Dave 12:51:39 08/12/08 (0)
      - RE: Danley Sound Labs SH 50 speakers - followup - djk 13:04:00 08/07/08 (0)
    - question about pro electronics - hollowboy 04:07:07 08/06/08 (1)
      - RE: question about pro electronics - Bill Fitzmaurice 07:00:32 08/06/08 (0)
- sh-25 - nl 14:12:42 08/04/08 (10)
  - RE: sh-25 - tomservo 14:08:10 08/05/08 (9)
    - RE: sh-25 - doug s. 19:40:11 09/14/08 (0)
    - RE: sh-25 - endust4237 20:46:44 08/09/08 (0)
    - I'm confused by the sensitivity - GGA 10:24:52 08/07/08 (1)
      - RE: I'm confused by the sensitivity - tomservo 11:18:54 08/07/08 (0)
    - a question for Mr. Danley: - Gera 21:06:56 08/05/08 (4)
      - RE: a question for Mr. Danley: - tomservo 11:24:55 08/07/08 (3)
        
        RE: a question for Mr. Danley: - pcasper 11:07:53 08/08/08 (2)
        
        RE: a question for Mr. Danley: - Ivan Beaver 14:46:58 08/09/08 (0)
        
        RE: a question for Mr. Danley: - tomservo 11:21:50 08/09/08 (0)
- More house friendy are the Yorkville U15.... - Gera 13:17:55 08/04/08 (5)
  - Anyone know what are the drivers used in Danley Labs horns? - Gera 13:54:37 08/05/08 (0)
  - RE: More house friendy are the Yorkville U15.... - Ivan Beaver 04:58:06 08/05/08 (3)
    - RE: More house friendy are the Yorkville U15.... - TDM 05:04:28 08/05/08 (2)
      - RE: More house friendy are the Yorkville U15.... - Ivan Beaver 10:38:01 08/05/08 (1)
        
        RE: More house friendy are the Yorkville U15.... - TDM 13:28:01 08/05/08 (0)
- RE: Danley Sound Labs SH 50 speakers - drvomir 00:33:59 08/03/08 (12)
  - RE: Danley Sound Labs SH 50 speakers - Mike Spence 14:15:51 08/03/08 (11)
    - RE: Danley Sound Labs SH 50 speakers - tomservo 15:30:39 08/03/08 (10)
      - RE: Danley Sound Labs SH 50 speakers - drvomir 05:56:32 08/05/08 (1)
        
        RE: Danley Sound Labs SH 50 speakers - tomservo 14:37:50 08/05/08 (0)
      - Questions for Tom Danley - PK 01:25:37 08/04/08 (6)
        
        RE: Questions for Tom Danley - tomservo 14:43:20 08/05/08 (5)
        
        RE: Questions for Tom Danley - PK 22:52:18 08/05/08 (4)
        
        RE: Questions for Tom Danley - Kim Schultz 06:28:17 08/06/08 (3)
        
        RE: Questions for Tom Danley - PK 07:59:41 08/06/08 (2)
        
        RE: Questions for Tom Danley - Kim Schultz 06:51:19 08/07/08 (1)
        
        RE: Questions for Tom Danley - PK 07:50:30 08/07/08 (0)
      - RE: Danley Sound Labs SH 50 speakers - Mike Spence 16:56:16 08/03/08 (0)
Finding some bottom for my DX2s - Canefire 14:29:30 08/02/08 (3)
- RE: Finding some bottom for my DX2s - Paul Joppa 21:37:13 08/03/08 (2)
  - RE: Finding some bottom for my DX2s - TerryO 23:21:10 08/03/08 (1)
    - RE: Finding some bottom for my DX2s - Paul Joppa 20:49:06 08/05/08 (0)
Dynaco A25 - AudioSoul 08:25:43 08/02/08 (3)
- 90.5dB/w/m 20-60 RMS wpc - Mortsnets 10:13:47 08/02/08 (2)
  - RE: 90.5dB/w/m 20-60 RMS wpc - Crazy Dave 11:55:03 08/04/08 (0)
  - RE: 90.5dB/w/m 20-60 RMS wpc - AudioSoul 12:59:45 08/02/08 (0)
21 Inch MCM Focal Clone Subwoofer Driver. - thetubeguy1954 07:50:21 08/02/08 (3)
- RE: 21 Inch MCM Focal Clone Subwoofer Driver. - Paul Eizik 10:53:28 08/02/08 (1)
  - Thanks Paul! (nt) - thetubeguy1954 12:31:27 08/02/08 (0)
- Photo Comparing 18in Hartley To 21in Focal Clone - thetubeguy1954 08:03:52 08/02/08 (0)
Bastanis Gemini - 2100 05:25:49 08/02/08 (0)
Anyone here ever heard the University EN-CB Speakers? - Cougar 19:23:51 08/01/08 (7)
- RE: Anyone here ever heard the University EN-CB Speakers? - Chef Henry 07:04:24 08/02/08 (6)
  - RE: Anyone here ever heard the University EN-CB Speakers? - Cougar 14:44:22 08/02/08 (5)
    - RE: Anyone here ever heard the University EN-CB Speakers? - Chef Henry 06:55:28 08/03/08 (4)
      - RE: Anyone here ever heard the University EN-CB Speakers? - Cougar 11:21:37 08/03/08 (3)
        
        RE: Anyone here ever heard the University EN-CB Speakers? - armando_senson@amsec.com 20:41:36 08/06/08 (2)
        
        RE: Anyone here ever heard the University EN-CB Speakers? - armando_senson@amsec.com 21:22:37 08/06/08 (0)
        
        RE: Anyone here ever heard the University EN-CB Speakers? - armando_senson@amsec.com 20:56:51 08/06/08 (0)
jbl 4670D vs. 3678 vs. altec model 19's - hpc 13:22:37 08/01/08 (4)
- RE: jbl 4670D vs. 3678 vs. altec model 19's - Tom Brennan 15:12:34 08/01/08 (3)
  - RE: jbl 4670D vs. 3678 vs. altec model 19's - hpc 16:35:53 08/01/08 (2)
    - For a little more money (and a lot more grunt) consider the 4670D......... - tweak48 20:35:14 08/08/08 (0)
    - 3678 - Tom Brennan 18:20:29 08/01/08 (0)
TAD TD-4003 Driver on TH-4001 Horn - Is it possible? - Mondie 00:45:48 08/01/08 (1)
- RE: TAD TD-4003 Driver on TH-4001 Horn - Is it possible? - A9X 11:00:58 08/06/08 (0)
How can I contact Kloss? - Yehuda 06:29:50 07/31/08 (6)
- RE: How can I contact Kloss? - tedk. 10:00:10 07/31/08 (0)
- RE: How can I contact Kloss? - Tom Brennan 07:06:02 07/31/08 (4)
  - No, that was Bonanza. nt - Dan_ed 08:01:31 07/31/08 (3)
    - RE: No, that was Bonanza. nt - tedk. 09:53:22 07/31/08 (2)
      - RE: No, that was Bonanza. nt - Tom Brennan 17:39:11 07/31/08 (1)
        
        RE: No, that was Bonanza. nt - pappy 1st 08:45:55 08/01/08 (0)
Need advises from Lowther fans - iamthanik@hotmail.com 10:02:20 07/30/08 (39)
- anyone else notice? - DaveV 16:47:14 08/02/08 (1)
  - No surprise to me! - Crazy Dave 12:36:47 08/04/08 (0)
- Amp or speaker? - ultrakaz 13:29:41 08/01/08 (0)
- RE: Need advises from Lowther fans - joao.bernarda@s-bernardo.pt 07:13:16 08/01/08 (13)
  - RE: Need advises from Lowther fans - Retsel 11:32:52 08/01/08 (12)
    - RE: Need advises from Lowther fans - joao.bernarda@s-bernardo.pt 14:17:55 08/01/08 (10)
      - RE: Need advises from Lowther fans - Retsel 15:33:09 08/04/08 (5)
        
        RE: Need advises from Lowther fans - joao.bernarda@s-bernardo.pt 03:14:31 08/06/08 (4)
        
        RE: Need advises from Lowther fans - Retsel 09:10:57 08/06/08 (3)
        
        RE: Need advises from Lowther fans - joao.bernarda@s-bernardo.pt 12:29:01 08/06/08 (2)
        
        RE: Need advises from Lowther fans - Retsel 15:08:53 08/06/08 (1)
        
        RE: Need advises from Lowther fans - joao.bernarda@s-bernardo.pt 15:14:04 08/07/08 (0)
      - RE: Need advises from Lowther fans - limono 07:25:07 08/02/08 (3)
        
        RE: Need advises from Lowther fans - lowtherHappy 12:17:32 08/02/08 (2)
        
        Fostex 208e sigma needs a tweeter - John Kalinowski 07:08:34 08/05/08 (0)
        
        RE: Need advises from Lowther fans - joao.bernarda@s-bernardo.pt 17:55:53 08/03/08 (0)
    - RE: Need advises from Lowther fans - Peter H-son 12:51:04 08/01/08 (0)
- RE: Need advises from Lowther fans - Paul Joppa 09:31:47 07/31/08 (0)
- RE: Need advises from Lowther fans - thetubeguy1954 07:29:26 07/31/08 (0)
- RE: Need advises from Lowther fans - jnr 17:41:05 07/30/08 (1)
  - Agree.... - plugmein 03:41:42 07/31/08 (0)
- RE: Need advises from Lowther fans - Saturntube 15:37:05 07/30/08 (0)
- RE: Need advises from Lowther fans - Vince S 13:34:18 07/30/08 (0)
- RE: Need advises from Lowther fans - TerryO 11:15:00 07/30/08 (15)
  - The Tone Tubby - badman 15:08:09 07/30/08 (14)
    - RE: The Tone Tubby - Tom Brennan 17:10:56 07/30/08 (13)
      - RE: Alcibiades - TerryO 18:47:58 07/30/08 (12)
        
        RE: Alcibiades - RC Daniel 19:24:04 07/30/08 (11)
        
        RE: Alcibiades - TerryO 20:55:21 07/30/08 (10)
        
        RE: Alcibiades - RC Daniel 18:29:06 07/31/08 (9)
        
        Gylippus - Tom Brennan 18:58:24 07/31/08 (8)
        
        RE: Gylippus - TerryO 20:01:01 07/31/08 (7)
        
        RE: Gylippus - Tom Brennan 06:35:48 08/01/08 (6)
        
        RE: Gylippus - tedk. 08:23:02 08/01/08 (0)
        
        Lysander - Tom Brennan 06:43:47 08/01/08 (4)
        
        RE: Lysander - TerryO 21:42:02 08/01/08 (3)
        
        And As Absolute Proof... - TerryO 12:26:07 08/02/08 (2)
        
        RE: And As Absolute Proof... - Tom Brennan 12:50:49 08/02/08 (1)
        
        RE: And As Absolute Proof... - TerryO 14:41:13 08/02/08 (0)
80Hz horn design questions - mikewazowsky 05:30:41 07/30/08 (7)
- ready to go - mikewazowsky 04:12:56 08/26/08 (0)
- exponential or hypex ? - mikewazowsky 03:13:32 07/31/08 (2)
  - RE: exponential or hypex ? - footstony 23:21:33 07/31/08 (1)
    - RE: exponential or hypex ? - cvandec 01:34:43 08/01/08 (0)
- here is one - footstony 18:45:31 07/30/08 (0)
- RE: 80Hz horn design questions - KlausF 10:11:28 07/30/08 (1)
  - RE: 80Hz horn design questions - mikewazowsky 13:02:49 07/30/08 (0)
Altec 604 vs Audio Note AN E for open floorplan - DougE 11:30:13 07/29/08 (42)
- RE: Altec 604 vs Audio Note AN-E for open floorplan - Peter Qvortrup 04:02:22 08/03/08 (0)
- RE: Altec 604 vs Audio Note AN E for open floorplan - John Kalinowski 05:16:31 07/31/08 (0)
- my thoughts (Long) - Rick C 20:32:21 07/30/08 (6)
  - RE: my thoughts (Long) - IMINTHEBASEMENT 16:18:14 08/16/08 (0)
  - 604 bass - castironandtubes 20:55:41 07/30/08 (4)
    - GPA 604 frequency response - gortnipper 13:37:36 07/31/08 (0)
    - RE: 604 bass - Rick C 22:10:59 07/30/08 (2)
      - Thanks! - castironandtubes 06:10:31 07/31/08 (0)
      - RE: 604 bass - RGA 23:19:20 07/30/08 (0)
- RE: Altec 604 vs Audio Note AN E for open floorplan - jnr 18:01:55 07/30/08 (3)
  - RE: Altec 604 vs Audio Note AN E for open floorplan - Tom Brennan 18:18:10 07/30/08 (2)
    - RE: Altec 604 vs Audio Note AN E for open floorplan - RGA 23:01:21 07/30/08 (0)
    - I'm clearly NOT a cones and domes kind of guy... - Ivan303 19:28:51 07/30/08 (0)
- RE: Altec 604 vs Audio Note AN E for open floorplan - RGA 11:05:00 07/30/08 (0)
- Altec 604? - Frihed89 01:03:11 07/30/08 (0)
- Another vote for the 604! - amandarae 18:45:05 07/29/08 (10)
  - RE: Another vote for the 604! - AZ_Gary 22:35:09 07/29/08 (4)
    - RE: Another vote for the 604! - amandarae 22:49:59 07/29/08 (3)
      - Thank you /nt - AZ_Gary 23:09:40 07/29/08 (2)
        
        Also, follow the plans exactly... - Ivan303 06:45:13 07/30/08 (1)
        
        Noted, thanks. /nt - AZ_Gary 06:58:40 07/30/08 (0)
  - Abe, great pic! - Ivan303 19:03:29 07/29/08 (4)
    - RE: Abe, great pic! - amandarae 20:01:40 07/29/08 (3)
      - I was very surprised at how much good quallity bass... - Ivan303 06:41:02 07/30/08 (2)
        
        RE: I was very surprised at how much good quallity bass... - amandarae 15:04:38 08/01/08 (1)
        
        Could be... - Ivan303 21:11:31 08/01/08 (0)
- RE: Altec 604 vs Audio Note AN E for open floorplan - limono 18:03:25 07/29/08 (0)
- RE: Altec 604 vs Audio Note AN E for open floorplan - Tom Brennan 16:15:28 07/29/08 (10)
  - RE: Altec 604 vs Audio Note AN E for open floorplan - Rune 02:56:46 07/30/08 (3)
    - RE: Altec 604 vs Audio Note AN E for open floorplan - RGA 11:15:31 07/30/08 (2)
      - RE: Altec 604 vs Audio Note AN E for open floorplan - dwkurfman 07:55:57 08/01/08 (1)
        
        RE: Altec 604 vs Audio Note AN E for open floorplan - RGA 11:29:48 08/02/08 (0)
  - RE: Altec 604 vs Audio Note AN E for open floorplan - DougE 17:01:01 07/29/08 (5)
    - Altec vs Audio Note vs Lowther - TerryO 11:03:40 07/30/08 (1)
      - RE: Altec vs Audio Note vs Lowther - RGA 11:23:34 07/30/08 (0)
    - RE: Altec 604 vs Audio Note AN E for open floorplan - condorhero 08:10:29 07/30/08 (0)
    - RE: Altec 604 vs Audio Note AN E for open floorplan - Tom Brennan 17:25:18 07/29/08 (0)
    - so do the 604 have this shouty quality like Lowthers and single-drivers? - MMasztal 17:16:08 07/29/08 (0)
- Having heard both, here's what I chose.. - MMasztal 13:21:35 07/29/08 (3)
  - Can I come over for a listen? - AJinFLA 04:33:10 07/30/08 (2)
    - Actually, the room is about 16 x 24 x 12... - MMasztal 05:32:49 07/30/08 (1)
      - RE: Actually, the room is about 16 x 24 x 12... - AJinFLA 09:23:43 07/30/08 (0)
Speaker cone - jonny- 01:13:24 07/29/08 (6)
- RE: Speaker cone - footstony 16:21:15 07/29/08 (0)
- Asking a lot - badman 10:53:11 07/29/08 (2)
  - RE: Asking a lot - jonny- 13:48:58 07/29/08 (1)
    - Paper formulation - badman 15:04:37 07/29/08 (0)
- RE: Speaker cone - smcdonie@uwsp.edu 09:26:55 07/29/08 (1)
  - RE: Speaker cone - jonny- 10:02:21 07/29/08 (0)
Are there about 20 D130s in this picture? - Scholl 18:22:16 07/28/08 (1)
- RE: Are there about 20 D130s in this picture? - JANDG 21:03:03 07/28/08 (0)
TAD MTM Horn Speakers - Crossover guidance - Mondie 17:50:03 07/27/08 (10)
- First things first - Paul Joppa 22:52:48 07/29/08 (1)
  - RE: First things first - Mondie 05:28:39 07/30/08 (0)
- RE: TAD MTM Horn Speakers - Crossover guidance - Duke 11:54:32 07/29/08 (1)
  - RE: TAD MTM Horn Speakers - Crossover guidance - Mondie 05:28:43 07/30/08 (0)
- RE: TAD MTM Horn Speakers - Crossover guidance - Hornloco 14:39:50 07/28/08 (5)
  - RE: TAD MTM Horn Speakers - Crossover guidance - Mondie 06:22:56 07/29/08 (4)
    - RE: TAD MTM Horn Speakers - Crossover guidance - Hornloco 12:48:52 07/29/08 (3)
      - RE: TAD MTM Horn Speakers - Crossover guidance - Mondie 05:28:51 07/30/08 (2)
        
        RE: TAD MTM Horn Speakers - Crossover guidance - Hornloco 12:50:38 07/30/08 (1)
        
        RE: TAD MTM Horn Speakers - Crossover guidance - Mondie 23:40:00 07/31/08 (0)
anyone knows what driver this is ? - angeloitacare 14:44:03 07/27/08 (1)
- RE: anyone knows what driver this is ? - waldenpuddle 17:38:51 07/28/08 (0)
used lowther pm2c @$450/pr a goog buy? - lpdeligny@hotmail.com 22:38:17 07/26/08 (1)
- current reatil = $795 from lowtherspeakers.com - jabates 02:03:24 07/27/08 (0)
Conical midrange horns - JoshK 17:30:50 07/26/08 (13)
- RE: Conical midrange horns - Clive@SwellSounds 17:39:05 07/28/08 (0)
- RE: Conical midrange horns - Teddy 08:12:46 07/27/08 (0)
- RE: Conical midrange horns - djk 05:22:34 07/27/08 (5)
  - RE: Conical midrange horns - JoshK 08:17:55 07/27/08 (4)
    - RE: Conical midrange horns - djk 08:43:52 07/27/08 (3)
      - RE: Conical midrange horns - JoshK 09:23:44 07/28/08 (0)
      - RE: Conical midrange horns - KlausF 09:54:08 07/27/08 (1)
        
        RE: Conical midrange horns - djk 11:58:44 07/28/08 (0)
- RE: Conical midrange horns - PK 00:29:55 07/27/08 (0)
- RE: Conical midrange horns - tomp787 21:50:44 07/26/08 (1)
  - RE: Conical midrange horns - JoshK 21:56:00 07/26/08 (0)
- RE: Conical midrange horns - Vatron 21:25:42 07/26/08 (1)
  - RE: Conical midrange horns - JoshK 21:51:41 07/26/08 (0)
scratchy compression driver - zobsky 15:47:05 07/26/08 (1)
- Clean - djk 16:16:39 07/26/08 (0)
Are bass guitar woofers suitable for home or too colored ? - coolinnl 13:04:56 07/26/08 (4)
- Basslite - Mats Gunnars 07:51:06 07/27/08 (2)
  - RE: Basslite - coolinnl 13:18:59 07/27/08 (1)
    - RE: Basslite - Mats Gunnars 14:59:15 07/27/08 (0)
- PS; Plan on using them as direct radiators - nt - coolinnl 13:08:17 07/26/08 (0)
which speaker to use on my amplifier ? - Iann 11:30:45 07/26/08 (0)
Help Identifying these tweeters - High Efficiency 07:51:00 07/26/08 (0)
Radian 850PB any good? - Phil-who? 02:29:57 07/26/08 (15)
- RE: Radian 850PB any good? - djk 08:11:40 07/26/08 (14)
  - RE: Radian 850PB any good? - KlausF 09:13:02 07/26/08 (13)
    - RE: Radian 850PB any good? - JoshK 16:27:28 07/26/08 (1)
      - RE: Radian 850PB any good? - KlausF 21:15:53 07/26/08 (0)
    - RE: Radian 850PB any good? - djk 11:54:07 07/26/08 (10)
      - RE: Radian 850PB any good? - KlausF 11:00:55 07/27/08 (5)
        
        RE: Radian 850PB any good? - Tom Brennan 11:20:00 07/27/08 (4)
        
        RE: Radian 850PB any good? - KlausF 06:57:10 07/28/08 (3)
        
        RE: Radian 850PB any good? - djk 12:09:27 07/28/08 (2)
        
        Sorry misinformation - KlausF 09:18:47 07/30/08 (0)
        
        RE: Radian 850PB any good? - KlausF 07:35:32 07/29/08 (0)
      - RE: Radian 850PB any good? - Phil-Who? 09:31:15 07/27/08 (3)
        
        RE: Radian 850PB any good? - serenechaos 15:23:45 08/01/08 (1)
        
        RE: Radian 850PB any good? - Phil-Who? 00:12:14 08/03/08 (0)
        
        RE: Radian 850PB any good? - KlausF 10:10:31 07/27/08 (0)
JBL 2310 Hartsfield Acoustic Lens - thetubeguy1954 13:14:55 07/25/08 (20)
- Here is a link with a description of the Ampex lens... - David Yost 14:13:40 07/26/08 (1)
  - Thanks Dave - thetubeguy1954 14:40:38 07/27/08 (0)
- RE: JBL 2310 Hartsfield Acoustic Lens - Paul Joppa 13:57:33 07/26/08 (0)
- This is a terrible idea. You would be far better off getting some measurement equipment instead of groping - AJinFLA 13:15:29 07/26/08 (6)
  - When Will You Realise Your Opinion Means Nothing To Me? - thetubeguy1954 05:47:42 07/27/08 (5)
    - My opinion? - AJinFLA 09:29:36 07/27/08 (4)
      - Yes Your Mistaken Opinion - thetubeguy1954 14:38:41 07/27/08 (3)
        
        Ok Tom, put the lens in front of the already marvelous sounding 8" midrange (nt) - AJinFLA 16:52:46 07/27/08 (2)
        
        Unlike You AJinFLA I Have Not Pre-Determined What The Outcome Will Be Before Actually Listening To The Lens Installed. - thetubeguy1954 10:04:19 07/28/08 (1)
        
        Misattributed Quote - badman 10:51:18 07/29/08 (0)
- RE: JBL 2310 Hartsfield Acoustic Lens - Bruce Edgar 21:44:35 07/25/08 (2)
  - RE: JBL 2310 Hartsfield Acoustic Lens - thetubeguy1954 06:32:53 07/26/08 (0)
  - RE: JBL 2310 Hartsfield Acoustic Lens - Paul Joppa 23:53:46 07/25/08 (0)
- RE: JBL 2310 Hartsfield Acoustic Lens - BTW 17:40:45 07/25/08 (0)
- RE: JBL 2310 Hartsfield Acoustic Lens - David Yost 15:32:06 07/25/08 (3)
  - RE: JBL 2310 Hartsfield Acoustic Lens - thetubeguy1954 06:57:51 07/26/08 (1)
    - McCauley Lens - Tom Brennan 08:28:49 07/26/08 (0)
  - A link... - David Yost 15:38:45 07/25/08 (0)
- RE: JBL 2310 Hartsfield Acoustic Lens - djk 13:58:19 07/25/08 (1)
  - RE: JBL 2310 Hartsfield Acoustic Lens - Tom Brennan 15:33:16 07/25/08 (0)
Klipsch Cornwall Identification - euclaray@yahoo.com 23:20:41 07/23/08 (11)
- 1973s.... - Chris Garrett 16:55:58 07/24/08 (7)
  - RE: 1973s.... - laznos 22:30:21 07/24/08 (1)
    - RE: 1973s.... - Tom Brennan 22:43:59 07/24/08 (0)
  - Vertical ? - djk 20:31:39 07/24/08 (4)
    - Can't speak to 'special order' - Chris Garrett 21:17:21 07/24/08 (3)
      - RE: Can't speak to 'special order' - djk 08:51:58 07/25/08 (2)
        
        Interesting... - Chris Garrett 14:30:08 07/25/08 (1)
        
        RE: Interesting... - djk 08:26:45 07/26/08 (0)
- Probably should be moved to Speaker Asylum? nt - Robert C. Lang 23:58:38 07/23/08 (2)
  - Cornwalls are high efficiency nt - Tom Brennan 18:36:23 07/24/08 (1)
    - This was originally posted in HiRez and I moved it here.* - Chris Garrett 21:18:34 07/24/08 (0)
Anybody with experience with the French PHY drivers? - Enophile 11:42:11 07/24/08 (10)
- RE: KM 30 - Dave-A 07:12:15 07/25/08 (4)
  - Thanks. Question... - Enophile 14:33:52 07/25/08 (3)
    - RE: The tweeter... - Dave-A 16:58:49 07/25/08 (1)
      - My bad, I meant to ask about the PHY cone tweeter. - Enophile 19:40:36 07/25/08 (0)
    - RE: Thanks. Question... - GEO 15:35:44 07/25/08 (0)
- I've owned my pair of KM30 SAG's. . - Jovy 03:26:39 07/25/08 (0)
- RE: Anybody with experience with the French PHY drivers? - datman 18:21:55 07/24/08 (0)
- They are great and SET friendly.... - stereohifi 14:02:56 07/24/08 (2)
  - Beautiful! - Enophile 14:10:04 07/24/08 (1)
    - yes, crossoverless TW37 - stereohifi 14:15:12 07/24/08 (0)
Got Lucky for Klipsch Cornwalls - euclaray@yahoo.com 23:46:46 07/23/08 (3)
- "L" = 1973 IIRC - mhardy6647 08:13:31 07/24/08 (0)
- Pure Gold... - mpathus 07:22:02 07/24/08 (0)
- RE: Got Lucky for Klipsch Cornwalls - George S. Roland 04:09:31 07/24/08 (0)
SAHF K55-V - freddyi 19:26:59 07/23/08 (0)
horn/bottlehead cancellation - ahendler 15:18:12 07/23/08 (6)
- RE: horn/bottlehead cancellation - ALFREDO 07:41:22 07/25/08 (0)
- RE: horn/bottlehead cancellation - Brian Walsh 10:57:59 07/24/08 (0)
- RE: horn/bottlehead cancellation - tedk. 05:01:04 07/24/08 (0)
- RE: horn/bottlehead cancellation - bean 20:16:46 07/23/08 (0)
- RE: horn/bottlehead cancellation - Paul Eizik 18:58:57 07/23/08 (0)
- RE: horn/bottlehead cancellation - Tom Brennan 18:26:14 07/23/08 (0)
Fried Heil diaphragm question - sanman 21:32:29 07/22/08 (2)
- RE: Fried Heil diaphragm question - djk 23:34:12 07/22/08 (1)
  - RE: Fried Heil diaphragm question - sanman 05:59:19 07/23/08 (0)
Budget Heil wall placement - sanman 07:44:42 07/22/08 (0)
horn loading - maclean3 06:08:19 07/22/08 (14)
- RE: horn loading - Paul Folbrecht 18:01:07 08/01/08 (0)
- Lowther - djk 16:22:59 07/24/08 (1)
  - RE: and Brociner! - Crazy Dave 10:06:15 07/25/08 (0)
- FLH + BLH - djk 17:57:45 07/22/08 (2)
  - RE: FLH + BLH - Bill Fitzmaurice 19:53:34 07/22/08 (1)
    - RE: FLH + BLH - djk 20:47:27 07/22/08 (0)
- RE: horn loading - Bill Fitzmaurice 06:53:28 07/22/08 (7)
  - RE: horn loading - maclean3 07:38:46 07/22/08 (6)
    - RE: horn loading - Bill Fitzmaurice 10:29:10 07/22/08 (5)
      - RE: horn loading - b.l.zeebub 05:15:11 07/24/08 (4)
        
        RE: horn loading - Bill Fitzmaurice 06:00:13 07/24/08 (3)
        
        RE: horn loading - Hornlover 07:40:59 07/24/08 (0)
        
        RE: horn loading - b.l.zeebub 07:12:06 07/24/08 (1)
        
        RE: horn loading - Bill Fitzmaurice 15:06:10 07/24/08 (0)
Altec 604's audtion??? - Oface 22:13:25 07/21/08 (18)
- RE: Altec 604's audtion??? - smcdonie@uwsp.edu 12:53:20 08/01/08 (2)
  - man..... - Oface 14:49:56 08/01/08 (1)
    - RE: man..... - smcdonie@uwsp.edu 06:44:09 08/04/08 (0)
- RE: Altec 604's audtion??? - smcdonie@uwsp.edu 13:39:02 07/24/08 (3)
  - I got these while ... - Oface 09:49:05 07/27/08 (2)
    - RE: I got these while ... - STUART 07:32:43 07/28/08 (1)
      - well..... - Oface 15:35:59 07/28/08 (0)
- RE: Altec 604's audtion??? - smcdonie@uwsp.edu 13:34:29 07/24/08 (0)
- RE: Altec 604's audtion??? - smcdonie@uwsp.edu 13:32:52 07/24/08 (0)
- not sure if my message made any sense.... - Oface 09:30:00 07/24/08 (0)
- PURE BEAUTY - smcdonie@uwsp.edu 07:17:58 07/23/08 (0)
- RE: Altec 604's audtion??? - Hornlover 07:44:31 07/22/08 (0)
- Try the Altec user's forum - gortnipper 01:13:54 07/22/08 (0)
- Make some quick crossovers - castironandtubes 23:21:22 07/21/08 (4)
  - RE: Make some quick crossovers - tedk. 03:40:02 07/22/08 (3)
    - Agree........... - drlowmu 14:18:44 07/22/08 (1)
      - Yes that is the 4th or 5th time in the last week you've promoted those... - castironandtubes 15:04:57 07/22/08 (0)
    - Good points - castironandtubes 09:02:49 07/22/08 (0)
$1500-2000 speakers (Paradigm reference series?) - chrisc 19:49:38 07/21/08 (1)
- RE: $1500-2000 speakers (Paradigm reference series?) - TerryO 00:17:53 07/22/08 (0)
Looking for Harry Olson's "Aoustical Engineering" - Jonathan Knight 18:59:26 07/21/08 (11)
- RE: Looking for Harry Olson's "Aoustical Engineering" - Steve Schell 19:28:33 07/23/08 (2)
  - RE: Looking for Harry Olson's "Aoustical Engineering" - DJL 06:00:19 07/27/08 (0)
  - RE: Looking for Harry Olson's "Aoustical Engineering" - Inmate51 08:01:19 07/24/08 (0)
- RE: Looking for Harry Olson's "Aoustical Engineering" - Inmate51 21:05:41 07/22/08 (0)
- RE: Looking for Harry Olson's "Aoustical Engineering" - Paul Eizik 19:18:15 07/21/08 (6)
  - Speak of the Devil - Tom Brennan 07:04:54 07/22/08 (1)
    - RE: Speak of the Devil - Paul Eizik 08:52:04 07/22/08 (0)
  - Hi Jonathan! Also available.... - grinagog 23:36:08 07/21/08 (3)
    - RE: Hi Jonathan! Also available.... - Jonathan Knight 03:07:51 07/22/08 (2)
      - RE: Hi Jonathan! Also available.... - Paul Eizik 09:02:35 07/22/08 (1)
        
        RE: Hi Jonathan! Also available.... - Jonathan Knight 01:57:22 07/24/08 (0)
newbie ? about efficiency - SpenceD 09:44:14 07/20/08 (2)
- About 88 dB (see following link)... - DeKay 10:19:44 07/20/08 (1)
  - very helpful. Thanks for the link! NT - SpenceD 11:15:51 07/20/08 (0)
Front loadad midbass horn with Fostex FE206E - Gera 18:46:30 07/19/08 (4)
- It's been done previously, with good results - hollowboy 17:30:04 07/23/08 (0)
- RE: Front loadad midbass horn with Fostex FE206E - hm 01:07:24 07/20/08 (2)
  - sat Horns - Gera 20:09:44 07/21/08 (1)
    - RE: sat Horns - hm 21:54:44 07/21/08 (0)
Community M200 - how is the peak at 6k best removed using a passive filter? - PK 15:40:53 07/19/08 (6)
- Is there pictures of DIY systems using M200(A)? - pommeau 01:29:23 07/20/08 (3)
  - Here is an M4 implementation - Mats Gunnars 04:31:10 07/21/08 (1)
    - RE: Here is an M4 implementation - PK 04:44:45 07/21/08 (0)
  - RE: Is there pictures of DIY systems using M200(A)? - PK 01:40:58 07/20/08 (0)
- RE: Community M200 - how is the peak at 6k best removed using a passive filter? - djk 00:02:06 07/20/08 (1)
  - RE: Community M200 - how is the peak at 6k best removed using a passive filter? - PK 00:58:25 07/20/08 (0)
Audiovector to 2" driver - reVintage 04:04:22 07/18/08 (4)
- RE: Audiovector to 2" driver - weltersys 21:31:13 07/18/08 (3)
  - RE: Audiovector to 2" driver - reVintage 23:46:44 07/18/08 (2)
    - RE: Audiovector to 2" driver - weltersys 12:48:40 07/19/08 (1)
      - RE: Audiovector to 2" driver - reVintage 23:15:18 07/22/08 (0)
Edgarhorn prices - Maril555 17:41:44 07/17/08 (4)
- Can somebody post current prices . . . - Poindexter 21:04:16 07/17/08 (3)
  - RE: Can somebody post current prices . . . - Maril555 14:03:24 07/19/08 (0)
  - RE: Can somebody post current prices . . . - Bruce Edgar 22:26:47 07/17/08 (1)
    - RE: Can somebody post current prices . . . - Maril555 04:09:20 07/18/08 (0)
Altec 603B vs. 604C - somejoe 17:01:17 07/17/08 (0)
Are standing waves a concern in horn back chambers? - Steve71 09:52:36 07/17/08 (16)
- Distortion may be more of an issue - RCA-fan 17:31:47 07/18/08 (0)
- RE: Are standing waves a concern in horn back chambers? - Jmmlc 00:06:38 07/18/08 (2)
  - RE: Are standing waves a concern in horn back chambers? - Steve71 11:05:29 07/18/08 (1)
    - RE: Are standing waves a concern in horn back chambers? - Jmmlc 01:07:24 07/25/08 (0)
- RE: Are standing waves a concern in horn back chambers? - weltersys 18:09:20 07/17/08 (1)
  - RE: Are standing waves a concern in horn back chambers? - Steve71 11:12:13 07/18/08 (0)
- Probably not - Tom Brennan 11:28:02 07/17/08 (8)
  - Typo - LarryB 10:37:39 07/18/08 (3)
    - Wavelengths - Steve71 11:01:12 07/18/08 (0)
    - RE: Typo - Doc B. 10:49:34 07/18/08 (1)
      - Mea culpa - LarryB 11:01:23 07/18/08 (0)
  - RE: Probably not - tomservo 19:12:25 07/17/08 (3)
    - RE: Probably not - Steve71 11:26:06 07/18/08 (2)
      - RE: Probably not - Bill Fitzmaurice 14:39:31 07/18/08 (1)
        
        Reflections - Steve71 17:12:33 07/21/08 (0)
- RE: Are standing waves a concern in horn back chambers? - coolinnl 10:35:02 07/17/08 (0)

Threads started on or before 3/31/07 are archived Here.
Threads started on or before 3/15/07 are archived Here.
Threads started on or before 2/28/07 are archived Here.
Threads started on or before 2/15/07 are archived Here.
Threads started on or before 1/31/07 are archived Here.

High Efficiency Speaker Asylum

Post a Message!