In Reply to: RE: Please re-read my post carefully posted by Fitzcaraldo215 on January 25, 2014 at 09:11:19:
...when I saw yours. The frequency range possible from SACD goes out in the ultrasonic range to ~50kHz. Some amplifier topologies appear to have trouble with ultrasonic frequencies, causing distortion and oscillation. I remember reading a caution when I had the Sony SCD-777 SACD player that one shouldn't use the switch on the back in the "full range" position (or something like that) unless you were sure that your amps behaved nicely with the ultrasonics present in the output. I never had any problems running "full range" with the tube amps I was using during the time I had the SCD-777. This reason also explains why RBCD is fine - brick wall filters take out the ultrasonic info.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I was going to post pretty much the same response... - krisjan 10:19:27 01/25/14 (6)
- RE: I was going to post pretty much the same response... - reuben 03:57:45 01/28/14 (4)
- Just in case... - Lew 13:49:17 01/31/14 (3)
- RE: Just in case... - reuben 07:33:01 02/01/14 (2)
- Thanks much... - Lew 19:02:56 02/03/14 (1)
- RE: Thanks much... - reuben 04:28:59 02/05/14 (0)
- Thanks for the input from both of you guys... - Lew 12:35:27 01/25/14 (0)