In Reply to: C555ES Hint posted by Lil Ole Mikey on May 26, 2003 at 07:27:18:
I was reviewing my manual with an aim to doing the realignment and also saw that note. It appears that you should do this three times with each of CD, SACD, SACD (dual layer).The detailed disc operation checks should be done with CD, SACD, SACD (dual layer), and hybrid discs but this is more complex. It will be useful if most of the realignment can be done automatically by the system using the "power on with disc" method.
Specifically, on page 4:
Resetting Operation at Power On
If the power is turned on with a disc loaded in the set, a sequence of operation as shown below will be performed. (The operation varies depending on the type of disc).
Condition: continue mode.1. CD
1. Sled reverse move (sled in)
2. Disc detect
3. IC setting for CD
4. Servo error signal offset auto adjustment
5. Spindle kick for LD on
6. LD on
7. Focus search
8. Focus servo on
9. Spindle kick
10. Spindle servo on
11. E-F balance auto adjustment
12. Tracking and sled servo on
13. Focus bias auto adjustment
14. Focus servo gain auto adjustment
15. Tracking servo gain auto adjustment
16. Jump to lead-in area
17. Read TOC
18. Stop1. SACD (single layer)
1. Sled reverse move (sled in)
2. Disc detect
3. IC setting for SACD
4. Servo error signal offset auto adjustment
5. Spindle kick for LD on
6. LD on
7. Focus search
8. Focus servo on
9. Spindle kick
10. Spindle servo on
11. E-F balance auto adjustment
12. Tracking and sled servo on
13. Focus bias auto adjustment
14. Focus servo gain auto adjustment
15. Tracking servo gain auto adjustment
16. Jump to lead-in area
17. Read TOC
18. Stop3. SACD (dual layer)
1. Sled reverse move (sled in)
2. Disc detect
3. IC setting for SACD
4. Servo error signal offset auto adjustment
5. Spindle kick for LD on
6. LD on
7. Focus search
8. Focus servo on (layer 0)
9. Spindle kick
10. Spindle servo on
11. E-F balance auto adjustment (layer 0)
12. Tracking and sled servo on (layer 0)
13. Focus bias auto adjustment (layer 0)
14. Focus servo gain auto adjustment (layer 0)
15. Tracking servo gain auto adjustment (layer 0)
16. Jump to lead-in area
17. Read TOC
18. Focus jump (layer 0->layer1)
19. E-F balance auto adjustment (layer 1)
20. Tracking and sled servo on (layer 1)
21. Focus bias auto adjustment (layer 1)
22. Focus servo gain auto adjustment (layer 1)
23. Tracking servo gain auto adjustment (layer 1)
24. Focus jump (layer 1->layer0)
25. StopI am having trouble with a few hybrids and will try this soon. Allen Wright has reported that the Hilary Hahn SACD is a dual layer SACD so I will use this one.
Regards,
Metralla
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- I have the XA-777ES manual and it has the same instructions - Metralla 07:47:39 05/26/03 (17)
- Oh, great. Another tip. First I have to set my XA777ES to default to stereo.... - Dalton 14:22:23 05/26/03 (3)
- LOL - what about Jerome's 12 second replay tip? - Metralla 14:58:12 05/26/03 (2)
- Yeah, I read that one. But that one is so far out there that I... - Dalton 18:18:19 05/26/03 (1)
- Far out....., yeah people used to believe the earth was flat at one time - jeromelang 20:35:04 05/26/03 (0)
- Roger Waters should be dual layer non-hybrid - SamS 14:03:24 05/26/03 (2)
- Roger Waters-what makes it "dual layered", not multi-c? nt - Duilawyer 17:57:05 05/26/03 (1)
- Re: Roger Waters-what makes it "dual layered", not multi-c? nt - SamS 20:28:31 05/26/03 (0)
- Not exactly... - Allen Wright 12:07:32 05/26/03 (9)
- Inner and outer numbers on Sony DL SACDs - Metralla 14:49:33 05/26/03 (8)
- Re: Inner and outer numbers on Sony DL SACDs - Lil Ole Mikey 17:14:19 05/26/03 (7)
- Christine - was it you? (nt) - Allen Wright 03:36:29 05/27/03 (6)
- yes it was me - Christine Tham 04:35:26 05/27/03 (5)
- What discs.......... - Chris Garrett 08:43:12 05/27/03 (4)
- Re: What discs.......... - Christine Tham 14:26:51 05/27/03 (0)
- Re: What discs.......... - Ted Smith 09:24:03 05/27/03 (2)
- Re: What discs.......... - Christine Tham 14:29:43 05/27/03 (1)
- Re: What discs.......... - Ted Smith 17:13:59 05/27/03 (0)