Home Headphone Heights

Welcome to Headphone Heights, the place for all your ear bud discussion

RE: SET headphone amp without hum?

Some amps have a reputation for being "noisy" and/or more sensitive to ground loop issues than others. Humming can also be cause by things like internal wires or parts that are loosely attached.

A few years back and seemingly out of nowhere, my tube phono preamp developed a hum. When I opened up the case, I discovered that one of the input cable terminal nuts had loosened up. After I untwisted the wire and tightened the internal nut, the hum disappeared. Another time, I discovered that the phono section in an integrated amp that I had bought on the used market had a terrible hum. I looked inside and noticed that the casing internal ground wire attachment was painted metal rather than bare metal. After I scraped the black paint residue away and re-tightened the terminal nut, no more hum...

So, sometimes it's worth opening up the case and checking things out. Or if the amp is new and/or still under warranty, consider sending it back for a checkup.

If all else fails try contacting the manufacturer for advice on how to deal with hums and/or ground loop issues.




Edits: 08/07/16

This post is made possible by the generous support of people like you and our sponsors:
  Parts Connexion  


Follow Ups Full Thread
Follow Ups

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.