|
Dynaco-Doctor Forum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
|
|
Dynaco-Doctor Forum Welcome! Need support, you got it. Or share your ideas and experiences. |
|
In Reply to: PAS-3 hum (I know, I know) posted by CaseyTheLibrarian on January 17, 2017 at 08:34:08:
Casey mentioned his tech thought it was in the right channel only. He also mentioned the hum went away when the power cord was pulled from the wall. Does the any of the units have a three prong plug? If so use a ground lift plug and see if the hum is gone. If it is a standard two prong plug try running a wire from the center of any three prong outlet to chassis ground.
The other thing to take into consideration is the fact that both of these units are not stock and could have not been right from the mods performed.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: PAS-3 hum (I know, I know) - xaudiomanx 16:54:04 01/23/17 (3)
- RE: PAS-3 hum (I know, I know) - CaseyTheLibrarian 16:56:54 01/23/17 (2)
- RE: PAS-3 hum (I know, I know) - xaudiomanx 17:17:14 01/23/17 (0)
- RE: PAS-3 hum (I know, I know) - xaudiomanx 17:15:15 01/23/17 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
