I'm hoping to connect up a Bozak N-106 Active Crossover so I can Bi-Amp my Bozak Symphony's. The Input impedance is 50k Ohms and I already had Joe remove the tone controls in my PAS3.
Can I somehow pull this off???
Thanks
Randall Nerison
This post is made possible by the generous support of people like you and our sponsors:
Topic - PAS3 - Tone Controls Bypassed - Need to connect up to a 50k Ohm Active Crossover - aguaazul@gmail.com 22:42:38 02/03/14 (12)
- RE: PAS3 - Tone Controls Bypassed - Need to connect up to a 50k Ohm Active Crossover - Joe Curcio 10:16:15 02/04/14 (7)
- RE: PAS3 - Tone Controls Bypassed - Need to connect up to a 50k Ohm Active Crossover - petercapo 12:57:18 02/04/14 (0)
- RE: PAS3 - Tone Controls Bypassed - Need to connect up to a 50k Ohm Active Crossover - aguaazul@gmail.com 10:43:19 02/04/14 (5)
- RE: PAS3 - Tone Controls Bypassed - Need to connect up to a 50k Ohm Active Crossover - Joe Curcio 10:55:48 02/04/14 (4)
- RE: PAS3 - Tone Controls Bypassed - Need to connect up to a 50k Ohm Active Crossover - petercapo 13:11:11 02/04/14 (1)
- RE: PAS3 - Tone Controls Bypassed - Need to connect up to a 50k Ohm Active Crossover - Joe Curcio 14:30:38 02/04/14 (0)
- RE: PAS3 - Tone Controls Bypassed - Need to connect up to a 50k Ohm Active Crossover - aguaazul@gmail.com 11:24:08 02/04/14 (1)
- RE: PAS3 - Tone Controls Bypassed - Need to connect up to a 50k Ohm Active Crossover - Joe Curcio 11:59:11 02/04/14 (0)
- RE: PAS3 - Tone Controls Bypassed - Need to connect up to a 50k Ohm Active Crossover - petercapo 06:23:41 02/04/14 (3)
- RE: PAS3 - Tone Controls Bypassed - Need to connect up to a 50k Ohm Active Crossover - aguaazul@gmail.com 08:39:23 02/04/14 (2)
- RE: PAS3 - Tone Controls Bypassed - Need to connect up to a 50k Ohm Active Crossover - petercapo 08:51:58 02/04/14 (1)
- RE: PAS3 - Tone Controls Bypassed - Need to connect up to a 50k Ohm Active Crossover - aguaazul@gmail.com 10:12:20 02/04/14 (0)