Paramour CLC PSU

Bottlehead Forum

Welcome! Need support, you got it. Or share you ideas and experiences.

24.128.190.214

My first mod to my Paramours was the simplest I could think of:
I replced the 270 Ohm PSU filter resistor with a 10 Hy, 270 Ohm
filter choke (Triad C-7X, same as the plate-loading choke).
I mounted it opposite the plate-loading choke, under the chassis.
PSU Designer II (from Duncan's amp site) indicates B+ ripple should
have been reduced to ~30 mV from ~810 mV.
I noticed a BIG drop in hum and an increase in clarity.
But comparisons to memories are suspect. So if anyone near Boston
has some stock Paramours (mrh?) and would like to A/B them,
please let me know.

This post is made possible by the generous support of people like you and our sponsors:

Parts Connexion

Topic - Paramour CLC PSU - Patrick Kopson 19:57:13 01/11/01 (2)

Re: Paramour CLC PSU - Mike9186 07:07:35 01/12/01 (0)

Re: Paramour CLC PSU - Doc B. ( but not a real Doc) 20:33:50 01/11/01 (0)

You can not post to an archived thread.