In Reply to: RE: Quickie upgrades & modifications posted by Dr. Toobz on October 11, 2009 at 19:34:52:
I'm running an extra set of iron on standoffs on either side of the output RCA's, hanging down. They are near the edges of the acrylic plate, so are well supported by the base. Seems to work fine.
Those aren't for the plate chokes, but crossover chokes. I have some LC low pass filters after the Speco's, before the RCA's. I do plan to add the Hammond chokes later, though. I think the acrylic can handle it, if not left in the sun for too long.
BTW for anyone interested, I need 500 ohms feeding the low pass, so I am using the Speco 1K taps for now (since it has an 8K input that we are using as a 4K input). Once I get the chokes in, I'll try switching to the 500 ohm tap. Output impedance should double back up to 500 ohms, and gain should bring the volume back up, too, I'm thinking.
Triamp... Take a load off!
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Quickie upgrades & modifications - artsybrute 05:56:51 10/12/09 (2)
- RE: Quickie upgrades & modifications - Dr. Toobz 16:52:13 10/12/09 (1)
- RE: Quickie upgrades & modifications - artsybrute 06:04:22 10/13/09 (0)