Bottlehead Forum

RE: Foreplay=0VAC, ST35=349VAC to Chassis

24.22.227.62

In Reply to: RE: Foreplay=0VAC, ST35=349VAC to Chassis posted by dbishopbliss on April 18, 2008 at 06:33:59

There's not quite enough info in the picture to, uh, give a clear picture. Presumably the signal/power supply ground is not currently tied to chassis ground. Typically you could tie the negative terminal of your final power supply capacitor to the chassis. See how that dotted red line (for B-, rather confusing) cuts across the mounting hole of the tag strip that the black electrolytics are mounted on? It looks like maybe the intention was to that the tag strip mounting hole is the chassis/power supply ground point. Is it connected there?
This may also be the issue with the Paramour I. The same kind of approach of tying the signal/power supply ground buss to the chassis somewhere near the filter caps will fix that.

Follow Ups:

power supply ground not connected to chassis ground - dbishopbliss 12:12:41 04/18/08 (5)
- RE: power supply ground not connected to chassis ground - Doc B. 14:31:10 04/18/08 (4)
  - Signal ground is never connected to Chassis - dbishopbliss 17:41:40 04/18/08 (3)
    - As a rule, yes. But, before you do, another question and something to check: - JC 18:49:34 04/19/08 (2)
      - No reading - dbishopbliss 16:01:53 04/20/08 (1)
        
        By 'no reading', I assume you mean infinity. - JC 18:09:20 04/20/08 (0)

Post a Followup:

FAQ

Post a Message!

Forgot Password?

Moniker (Username):
Password (Optional):
	Remember my Moniker & Password (What's this?) Eat Me
E-Mail (Optional):
Subject:

Message:	(Posts are subject to Content Rules)

Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:	Automagically notify you when someone responds.

To view your new posting or follow-up, click on the RELOAD or REFRESH button on your browser.