|
Bottlehead Forum Welcome! Need support, you got it. Or share you ideas and experiences. |
|
|
|
Bottlehead Forum Welcome! Need support, you got it. Or share you ideas and experiences. |
|
In Reply to: Sweetest Whispers Questions posted by dbishopbliss on January 5, 2006 at 06:27:10:
In the FPIII, with the volume turned all the way up, (full clockwise) the incoming audio signal passes through only the series (typically 33K) resistor, and the 15K resistance serves as the grid-to-ground resistor. The input resistance varies from 48K at CW poassition (full volume) to 33K at at the fully CCW position, if the series resistor is 33K.At lower levels, the incoming signal passes through the 33K resistor and then any of the ten resistors which are "upstream" from the "wiper" switch contact.
At line level signal voltages, any noise that may be generated by the resistors is minimal.
/ed B in NH
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Sweetest Whispers Questions - Dyna Saur 08:10:52 01/05/06 (4)
- Re: Sweetest Whispers Questions - dbishopbliss 08:52:49 01/05/06 (3)
- Re: Sweetest Whispers Questions - Dyna Saur 10:14:38 01/05/06 (2)
- Now I'm really confused... - dbishopbliss 13:10:07 01/05/06 (0)
- Re: Sweetest Whispers - JB 11:32:16 01/05/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
