88.116.7.182
Hello,
in the manual there is the possibility of XLR connection or(!!) RCA.
I thought if you route the yellow and red cable from the XLR connector to the RCA connector and from the RCA connector to the earth then it should work.
But you can use only the XLR connection or the RCA connection, but not both at the same tine.
With the RCA connection the blue cable from the output TX is unused.
So the yellow and red one goes from XLR connector to the RCA connector.
And the blue cable which goes to the XLR has no further connection.
Anyone tried this?
Best regards
Stefan
Follow Ups: