|
ANK AudioKits Forum ANK AudioKits support forum |
|
|
|
ANK AudioKits Forum ANK AudioKits support forum |
|
In Reply to: Dac 1.1 kit valves - which is the best? posted by astrostar59 on February 23, 2006 at 16:35:18:
A simple upgrade to the PPL circuit of the AN DAC 1.1 or 1.2 (Phase Lock loop circuit on the digital board). The stock PLL circuit is a 1K resister (R38) and a .47uf cap (C35)in series to ground,that originates from pin 20 on the CS 8412 crystal chip. The upgrade is a direct replacement of components with a high quality 500 oHm resistor and a .22 cap. Once those have been replace, bypass both with a 3300pf cap, keep the component leads as short as possible.
This is a cheep upgrade resulting in better instrument separation, and crisper sound. I saw the upgrade on a previous post in the General digital drive, but I tried to perform a search on the thread but could not find it.Tom R
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Dac 1.1, PPL upgrade - Tom R 11:05:37 02/27/06 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
