|
ANK AudioKits Forum ANK AudioKits support forum |
|
|
|
ANK AudioKits Forum ANK AudioKits support forum |
|
In Reply to: You need to get a schematic. If you have one, from the kit, then.. posted by John PA on June 3, 2004 at 10:34:08:
John.I am looking at the schematic. So, you bypass the relay network, and feed the signal directly to pin 9 and 10 on the reciever chip?
Where do you source the input tranny? I see AN is no longer selling these?
With the interstage tranny, which type do you use, and does this get wired in directly from the 1865 to the inputs on the output stage?
For the caps, I assume you are talking about the majority of the 47uF 16V electrolytics feeding the reciever and the dac? What type did you use, and how much of an improvement was noticed?
Thanks,Bryan
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: You need to get a schematic. If you have one, from the kit, then.. - BTK 11:03:46 06/03/04 (1)
- I thought that AN parts would be available through Parts Connection. . - John PA 11:31:11 06/03/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
