In Reply to: AN-E cabinet construction questions posted by billfort on November 15, 2005 at 08:20:28:
Spread the blueprint sheet 2 of 6 on the table. The scale says
1:3. Using a centimeter scale measure from the top of the board
to the top opening of the crossover hole. Its 8.25cm. Times that
by 3 = 24.75cm. From the bottom its 14.9cm X 3 = 44.7cm. Add up
24.75 + 44.7 + 7.2(crossover hole) = 76.65cm. Damn close.
You want the width also? O.K.,its 4.15cm from both ends X 3 =
12.25cm. So, 12.45 + 12.45 + 9.0(width of the hole) = 33.9cm.
How about that?To sum it up, the top of the crossover hole is 44.7cm and both
sides of the holes are 12.25cm from the edges of the board.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: AN-E cabinet construction questions - scarebus 02:10:39 11/18/05 (1)
- Re: AN-E cabinet construction questions - billfort 05:27:28 11/18/05 (0)