Help with faulty Kit One if possible :o(

ANK AudioKits Forum

ANK AudioKits support forum

funniefishie@yahoo.co.uk

Hi guys,
I'm really hoping someone can help me please.
A friend of mine bought a used Kit One recently but it seems to have developed a fault (or maybe it already had it). Knowing that I had some experience with a soldering iron he brought it round for me to have a look at. Luckily I managed to find the schematics on-line so I also have some info.
Anyway, the problem is this... if you switch the amp on with no tubes plugged in there is a 100ohm resistor near the corner of the power supply board (connects to ground, v. small cap across it) which just smokes and burns up, or the fuse blows - I've fitted two replacement resistors so far.
Any ideas what the problem might be?
Many thanks in advance!
Les.

This post is made possible by the generous support of people like you and our sponsors:

Atma-Sphere Music Systems, Inc.

Topic - Help with faulty Kit One if possible :o( - funniefishie@yahoo.co.uk 12:37:25 10/02/05 (2)

Further to my last post.... - funniefishie@yahoo.co.uk 15:56:55 10/03/05 (1)

Re: Further to my last post.... - Bernard Yang 01:26:38 10/05/05 (0)

You can not post to an archived thread.