|
ANK AudioKits Forum ANK AudioKits support forum |
|
|
|
ANK AudioKits Forum ANK AudioKits support forum |
|
In Reply to: Any good mods for the digital board? posted by BTK on June 3, 2004 at 06:50:17:
I would look at it and get instruction on where the signal is going and what can be done. I skipped over all of the input before the Crystal chip and wired directly to it with a Trans 270 between it and the input. After the 1865 chip I go to an interstage transformer eliminating the filtering, which does improve the sound and "open" up the unit. I also use all nos Tantalum resistors. All the capacitors are also changed.I found that going to a battery supply for the digital board is a big step forward also and it is not hard to implement.
ja in hot and dry, Tucson, AZ
The Elaborate DAC=55/76 or 27 Balanced Preamp=Balanced Six Pacs=Newform Research 645
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- You need to get a schematic. If you have one, from the kit, then.. - John PA 10:34:08 06/03/04 (2)
- Re: You need to get a schematic. If you have one, from the kit, then.. - BTK 11:03:46 06/03/04 (1)
- I thought that AN parts would be available through Parts Connection. . - John PA 11:31:11 06/03/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2025, Audio Asylum, all rights reserved ]
