Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: Sanders Magtech Amp posted by stereo5 on October 3, 2016 at 13:13:22:
I have a Magtech amp driving Magnepan 3.7 speakers and the sound is fabulous, but keep in mind that it runs extremely HOT, even after a short period of use. Too hot to touch. Not surprising since it requires 2400 watts to operate and is delivering 900 watts into 4 ohms. Sanders recommends that it be kept ON all the time but I don't do that. Make sure you give it lots of space for ventilation.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Sanders Magtech Amp - Charles Bridges 12:49:39 10/07/16 (12)
- Well, being rated at 2400 Watts input means it MAY draw as much... - jeffreybehr 14:03:13 10/08/16 (0)
- Huh? Sanders claims " it runs very cool" - Feanor 05:59:01 10/08/16 (10)
- "stone cold" in fact! - Mick Wolfe 09:30:57 10/08/16 (9)
- RE: "stone cold" in fact! - Charles Bridges 09:53:34 10/08/16 (8)
- RE: "stone cold" in fact! - erik_sq 14:25:21 10/09/16 (2)
- RE: "stone cold" in fact! - erik_sq 14:53:44 10/09/16 (0)
- RE: "stone cold" in fact! - Charles Bridges 14:42:19 10/09/16 (0)
- RE: "stone cold" in fact! - Mick Wolfe 12:27:48 10/08/16 (0)
- RE: voltage regulator problem - genungo 12:10:38 10/08/16 (2)
- RE: voltage regulator problem - angela100 19:23:21 10/08/16 (1)
- Impressive customer service! - genungo 12:14:21 10/09/16 (0)
- RE: "stone cold" in fact! - stereo5 09:59:50 10/08/16 (0)