|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
|
|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: Nice looking posted by E-Stat on August 31, 2016 at 16:16:18:
There is another 10,000uf on the amp module. Infact you can just connect a tranni direct to the board. But the suggestion by the seller is to run them on DC.
The way this one is setup it will provide about 160W. My speakers are Beyma 15" concentrics at 99db efficient. So I only need a few watts for good volume.
| retro-thermionic |
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Nice looking - mwhouston 16:21:59 08/31/16 (6)
- RE: Nice looking - E-Stat 16:31:28 08/31/16 (5)
- 's why I like rebuilt valve amps with BIGGG caps and snubbed soft-recovery diodes. - Timbo in Oz 14:30:09 09/17/16 (0)
- RE: Nice looking - mwhouston 16:52:07 08/31/16 (3)
- That is the kind of stiffness - E-Stat 17:06:14 08/31/16 (2)
- RE: That is the kind of stiffness - mwhouston 17:26:24 08/31/16 (1)
- What I find most important - E-Stat 17:56:02 08/31/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
