Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: RE: To split hairs... posted by E-Stat on June 2, 2016 at 13:57:58:
You're welcome to your speculation. I, on the other hand, tend to rely on ARC's own description of their output stage circuitry.
"Inside, however, you will find a new motherboard architecture that incorporates a JFET input stage similar to that used in the VTM200, followed by a cathode-follower / output driver stage using two 6H30 twin triodes."
I don't think anything I said contradicts their description. A cathode-follower IS the output driver stage. I'm not sure what the disconnect is here as they say nothing about the tube providing gain. My educated 'speculation' is that it is a pretty common cathode follower with unity gain, or less.
But in any case, the LS25 MKII and LS16 MKII were nice but not quite to my taste. I like a more "tubey" sound in my tube linestage.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: To split hairs... - AbeCollins 15:07:36 06/02/16 (7)
- Here's the distinction - E-Stat 15:20:21 06/02/16 (6)
- RE: Here's the distinction - Jim McShane 15:46:23 06/02/16 (5)
- Fair enough - E-Stat 15:59:45 06/02/16 (4)
- No worries - AbeCollins 19:40:58 06/02/16 (0)
- RE: Fair enough - Jim McShane 18:58:44 06/02/16 (2)
- Thanks, Jim -nt - E-Stat 05:50:20 06/03/16 (0)
- RE: Fair enough - AbeCollins 20:01:51 06/02/16 (0)