Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: RE: There is someting to this high powered amp approach posted by Bill Spohn on February 2, 2016 at 12:59:41:
Yes on amp watts quality , regardless thou, if you require 200-300 watts for unclipped reproduction , the 45 watts is clip city ...
The ATC could be the issue as suggested by some, they do use a dynamic compressing dome mid unit , very good for nearfield listening ,not much for farfield listening ...
Edits: 02/02/16 02/02/16 02/02/16
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: There is someting to this high powered amp approach - A.Wayne 14:31:35 02/02/16 (19)
- RE: There is someting to this high powered amp approach - Bill Spohn 16:03:35 02/02/16 (3)
- RE: There is someting to this high powered amp approach - A.Wayne 17:31:03 02/02/16 (1)
- RE: There is someting to this high powered amp approach - Bill Spohn 06:40:13 02/03/16 (0)
- RE: There is someting to this high powered amp approach - A.Wayne 17:15:45 02/02/16 (0)
- RE: There is someting to this high powered amp approach - Freo-1 15:15:51 02/02/16 (14)
- RE: There is someting to this high powered amp approach - b.l.zeebub 16:15:03 02/02/16 (10)
- RE: There is someting to this high powered amp approach - morricab 03:05:27 02/03/16 (7)
- RE: There is someting to this high powered amp approach - A.Wayne 07:30:22 02/04/16 (0)
- RE: There is someting to this high powered amp approach - b.l.zeebub 04:40:45 02/03/16 (5)
- RE: There is someting to this high powered amp approach - morricab 05:25:12 02/03/16 (4)
- RE: There is someting to this high powered amp approach - b.l.zeebub 12:45:21 02/03/16 (3)
- RE: There is someting to this high powered amp approach - morricab 07:30:50 02/04/16 (2)
- RE: There is someting to this high powered amp approach - A.Wayne 07:33:08 02/04/16 (1)
- RE: There is someting to this high powered amp approach - morricab 13:51:24 02/04/16 (0)
- RE: There is someting to this high powered amp approach - Freo-1 17:03:47 02/02/16 (1)
- RE: "It does look as if they glued the 3" mid to the 6" driver." - b.l.zeebub 18:48:43 02/02/16 (0)
- RE: There is someting to this high powered amp approach - A.Wayne 15:18:58 02/02/16 (2)
- RE: There is someting to this high powered amp approach - hahax@verizon.net 16:03:01 02/02/16 (0)
- RE: There is someting to this high powered amp approach - Freo-1 15:36:38 02/02/16 (0)