|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
|
|
Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: Audilble Illusions M3A Selector Switch Frozen posted by jk on January 28, 2016 at 21:46:07:
There is a "bushing" in the front panel that the long shaft rides in (hard to say if the bushing is part of the shaft assembly). If the shaft is frozen in that bushing you might be able to free it by squirting a little lubricant (WD-40 etc.) into the bushing.
You can see the back side of the bushing with the lid off. With the knob off you could try squirting the lub from the front/panel side too. Let it sit for awhile and hopefully it will loosen. Unplug first of course. :)
Good luck.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: Audilble Illusions M3A Selector Switch Frozen - rwiley 10:53:24 01/29/16 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
