Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: RE: New Pre & Amp posted by pbcarch@gmail.com on January 23, 2016 at 06:09:49:
I suggested cleaning the jumpers and jacks in an earlier post. Failing that not helping you've at least identified a spot that directly affects the situation. The jacks or some part of the board immediately at the back of the unit has broken contact and is temporarily fixed when you press on that area. If you cannot find anything yourself and you take it in for service, be sure to tell the tech about pushing the jumpers effect on the situation.
Honestly, you've already found the area that needs attention. Hopefully you can fix it yourself.
Jonesy
"I know just enough to get into trouble. But not enough to get out of it."
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Twice now you've mentioned pushing on the jumpers... - Jonesy 06:56:33 01/23/16 (10)
- RE: Twice now you've mentioned pushing on the jumpers... - pbcarch@gmail.com 07:36:25 01/23/16 (9)
- Not mineral spirits... - Jonesy 08:18:38 01/23/16 (8)
- RE: Not mineral spirits... - pbcarch@gmail.com 10:21:48 01/23/16 (7)
- Does seem to be breaking contact when pressure applied/removed. - Jonesy 11:38:47 01/23/16 (2)
- RE: Does seem to be breaking contact when pressure applied/removed. - pbcarch@gmail.com 12:00:30 01/23/16 (1)
- Marantz MM8077 - Jonesy 07:37:11 01/24/16 (0)
- RE: Not mineral spirits... - pbcarch@gmail.com 10:26:41 01/23/16 (3)
- RE: Not mineral spirits... - pictureguy 11:27:47 01/29/16 (2)
- RE: Not mineral spirits... - pbcarch@gmail.com 11:54:54 01/29/16 (1)
- RE: Not mineral spirits... - pictureguy 15:58:40 01/29/16 (0)