Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
Hello everyone looking for some help from people much more in the know than i am.
My Marantz 9200 from 2002 seems to be dying (either loose connection in preamp to amp connections or amps are dying) , its driving my main room.
I am looking at going the separates route this time but have limited funds. I spent around 3k for the 9200 and really like the "warm" sound it prodcues through my Mission 780's
My question (please dont be insulted by my naive question) is since i like the sound of the Marantz should i stcik with a Marantz preamp + any amp combo? Basically does the preamp mainly affect the tonality or the amp or is it really a function of both combined?
This post is made possible by the generous support of people like you and our sponsors:
Topic - New Pre & Amp - pbcarch@gmail.com 08:33:40 01/22/16 (26)
- RE: New Pre & Amp - noway 05:59:43 01/23/16 (12)
- RE: New Pre & Amp - pbcarch@gmail.com 06:09:49 01/23/16 (11)
- Twice now you've mentioned pushing on the jumpers... - Jonesy 06:56:33 01/23/16 (10)
- RE: Twice now you've mentioned pushing on the jumpers... - pbcarch@gmail.com 07:36:25 01/23/16 (9)
- Not mineral spirits... - Jonesy 08:18:38 01/23/16 (8)
- RE: Not mineral spirits... - pbcarch@gmail.com 10:21:48 01/23/16 (7)
- Does seem to be breaking contact when pressure applied/removed. - Jonesy 11:38:47 01/23/16 (2)
- RE: Does seem to be breaking contact when pressure applied/removed. - pbcarch@gmail.com 12:00:30 01/23/16 (1)
- Marantz MM8077 - Jonesy 07:37:11 01/24/16 (0)
- RE: Not mineral spirits... - pbcarch@gmail.com 10:26:41 01/23/16 (3)
- RE: Not mineral spirits... - pictureguy 11:27:47 01/29/16 (2)
- RE: Not mineral spirits... - pbcarch@gmail.com 11:54:54 01/29/16 (1)
- RE: Not mineral spirits... - pictureguy 15:58:40 01/29/16 (0)
- RE: New Pre & Amp - fantja 05:04:37 01/23/16 (0)
- RE: New Pre & Amp - airtime 16:46:01 01/22/16 (3)
- RE: New Pre & Amp - pbcarch@gmail.com 16:54:19 01/22/16 (2)
- Intermittent problem should be a connection or relay or switch - jedrider 14:18:14 01/23/16 (0)
- RE: New Pre & Amp - airtime 17:25:30 01/22/16 (0)
- RE: New Pre & Amp - Mr Peabody 12:36:24 01/22/16 (3)
- RE: New Pre & Amp - pbcarch@gmail.com 12:50:32 01/22/16 (2)
- RE: New Pre & Amp - Mr Peabody 15:54:41 01/22/16 (1)
- RE: New Pre & Amp - pbcarch@gmail.com 16:28:17 01/22/16 (0)
- RE: New Pre & Amp - bboroski 11:31:08 01/22/16 (0)
- Before you head down that path... - musetap 09:12:24 01/22/16 (2)
- RE: Before you head down that path... - pbcarch@gmail.com 09:22:01 01/22/16 (1)
- Have you tried cleaning the pre in out jumpers? - Jonesy 20:47:53 01/22/16 (0)