Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: RE: You would not connect the center tap at all posted by Thermionic27609 on July 16, 2015 at 11:53:22:
You will want to see what the input impedance actually is. It is is 1 or 2K you will be alright (the transformer is designed for 600, not 500 ohms). If the input is 10K you will want to place a resistor across the output of the preamp so the transformer has a proper load. That way you will get the flattest frequency response.
In most cases though you really don't want to run the mic preamp into the console- if at all possible run it directly into the recorder. That works great as long as the preamp has a volume control.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- That might be correct - Ralph 12:50:07 07/16/15 (0)