Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
I was wondering if I could ditch the 330uF input coupling cap in my EDGE M8 amp since my BAT VK-30 preamp has a 1uF output coupling cap. I wanted to do a 6 pac version on the BAT VK-30 which would bring the output capacitance to 3uF and if so, Just get rid of the 330uF input cap on the amp?
I'm so confuse now on the Corner frequency adjustment for my amp that I just want to get rid of that cap if possible.
The EDGE M8 has an static input impedance of 33kohm when measure after the 330uF input coupling cap to ground.
any help is greatly appreciated.
This post is made possible by the generous support of people like you and our sponsors:
Topic - BAT VK-30 preamp and EDGE M8 Victor K. help! - Cougar 17:35:56 01/24/15 (7)
- RE: BAT VK-30 preamp and EDGE M8 Victor K. help! - Victor Khomenko 06:04:53 01/31/15 (0)
- Thank you to everone for the help. - Cougar 19:29:09 01/25/15 (3)
- Don't say it; show it - madisonears 21:39:25 01/25/15 (1)
- RE: Don't say it; show it - Cougar 07:36:13 01/26/15 (0)
- Sorry, meant Thank You to everyone. - Cougar 20:53:46 01/25/15 (0)
- RE: BAT VK-30 preamp and EDGE M8 Victor K. help! - Caucasian Blackplate 18:06:40 01/24/15 (1)
- RE: BAT VK-30 preamp and EDGE M8 Victor K. help! - Cougar 10:52:34 01/25/15 (0)