Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: very interesting posted by Penguin on October 14, 2014 at 21:01:20:
is the primary issue is with the speakers. While they have a more linear load than the U-1s, it is consistently lower - especially at the bottom. It stays below 4 ohms until about 200 hz before rising.
Most of my listening in the garage is not at high levels, but I cranked it a bit last night. Long before clipping, the amp's sound gets very unhappy. By contrast, the Stasis doesn't change character at all until clipping. I've had that amp for over thirty years driving Acoustats (initially 2+2s) and it has never failed. I'm putting it back in service today. :)
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- My guess - E-Stat 05:58:11 10/15/14 (4)
- RE: My guess - Dman 09:17:23 10/15/14 (3)
- Stasis 3 - E-Stat 09:59:58 10/15/14 (2)
- Very nice! - Dman 10:59:22 10/15/14 (1)
- RE: Very nice! - rick_m 16:43:43 10/15/14 (0)