Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: RE: I might give this a try. posted by Ugly on October 12, 2014 at 08:31:29:
As I stated, I had very good results from upgrading my Graham Slee Reflex X phono stage with a Belleson SuperPower regulator. (link to Vinyl Asylum post below)
Belleson now makes the SPM regulator, which is smaller, and has lower noise specs. than the one I used. Maximum current on the SPM is 225mA, and my Slee draws about 30mA quiescent. If the SPM were available then, that's what I'd have used. Check the current draw of your 651P, and if the SPMs work, I'd say go for it!
Oh, and here's (link) why I suggested you try a higher current AC transformer. Even a larger (higher current) AC to 12v AC wall-wart might help. Steve McCormack offers transformer upgrades to some of his older (Micro series) equipment for the same reason.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: "Verry tempting." - 1973shovel 09:31:36 10/12/14 (1)
- RE: "Verry tempting." - jedrider 09:51:53 10/12/14 (0)