Amp/Preamp Asylum Looking for a new Amp or Preamp? If you're after tubes, post over here. |
|
In Reply to: RE: " humble RadioShack 100k alps pot " posted by airtime on July 3, 2014 at 08:50:06:
Hi and thanks for the reply
I am always looking for an altenative to "discrete" attenuators
The good mechanics are very expensive
I have decided to give cermet pots a try, for a diy project
Bourns 10K linear to be modified
Unfortunately they are single ... but i will try anyway
I opened an alps blue velvet once
The resistive layer is deposited on a plastic film that can warp
Instead, if i am not wrong, in the cermet pot the resistive trace is on a ceramic substrate ? this could give a much better contact with the wiper
But i have to try as soon as i will receive the pieces
Regarding the value looking at the passive around, Placette included, 10K is quite common
I would try even lower ... 5K
If the dac has a tube output it will not work
But i have decided not to go the tube way ... so
Thanks again
Kind regards,
bg
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- RE: " humble RadioShack 100k alps pot " - beppe61 22:15:50 07/03/14 (4)
- RE: " humble RadioShack 100k alps pot " - b.l.zeebub 03:06:14 07/07/14 (3)
- RE: " humble RadioShack 100k alps pot " - beppe61 07:24:53 07/07/14 (2)
- RE: " humble RadioShack 100k alps pot " - b.l.zeebub 08:58:19 07/07/14 (1)
- RE: " humble RadioShack 100k alps pot " - beppe61 12:28:10 07/07/14 (0)